الوصف

Slitter basic data:
Slitter mount:5pcs*-  *0pcs;
Top slitter: OD**0mm, OD**0mm  HRC  MAX*2
Bottom slitter: OD**5MM****0MM HRC  MAX*2
Materials:High-speed tool steel, SKD*1, SKH*1, W6Mo5Cr4V2,
W2Mo9Cr4VCo8
Slitting system:

GENERAL DESCRIPTION

"EXPANDO" slitting system is useable for applications with many cuts and size changes. It has a tangential cut with the top holder connected to the bottom counterblade through an engaging piston.

The pneumatic knife holder is mounted on a linear rail with a ball bearing bracket.

The bracket has a manual clamp and the linear rail has dual pneumatic braking clamps.

The bottom knife assembly is mounted on a hardened and chromed, expandable shaft. When air is applied to the shaft, the bottom blades units are locked in place. The main feature of the "EXPANDO" bottom knife assembly is the easy replacement of the cutting edge called "EXPANDETTE". It’s possible to replace the "EXPANDETTE" rings without shaft removal ever. This ring is made in HSS and has two cutting edges.

The "EXPANDO" system has three versions:

1. Manual positioning.
2. Semiautomatic positioning. A digital display sliding on a rail (manually operated) parallel to the bottom knife assemblies allows exact measurements to the pneumatically connected top and bottom units.
3. Automatic positioning. With web out displacement is achieved through single translator moving the engaged units.With web in, there are two translators, positioned by brushless motors. Operations are controlled through PC, installed on a command panel outside the system. Positioning accuracy for each group ± 0.2 mm (0.**8").

Note:The "EXPANDO" slitting system can be supplied complete with electro-pneumatic panels for shaft’s motor drive and control of pneumatic functions.

"EXPANDO"ADVANTAGES

1. Controlled slitting parameters (side load, blade penetration, cant angle), D*2 steel and HSS assure longer production runs (less spare parts in inventory).
2. No shaft removal for bottom blade replacement (time reduction in terms of production).
3. Two cutting edges on bottom assembly before blade replacement (elimination of regrinding).
4. Top and bottom pneumatic engaging piston connection allows for quick setups and changes.
5. Slit uniformity due to pneumatic engaging piston connection setups.
6. Possible to retrofit any existing machine (thus increasing production speed on old machines).
7. Minimum slit width to *0 mm. Special version is available for *5.4 mm (1").