الوصف
JIANGSU BAVI ENG. & TECH. CO.,
LTD is a Hi-Tech
enterprise, which is in accordance with the direction of state
strategic development, and owns self-innovation ability with strong
growth. Main products are the system equipments on the basis of the
application for heat exchanger, including Gasketed plate heat
exchanger, all-welded plate heat exchanger, brazed plate heat
exchanger, shell and tube heat exchanger, heat exchanger unit,
first station of heat net system, oil circulation lubricating
system, flue gas heat recovery system, seawater desalinization
equipment, additional heat boiler, mud extractors, finned radiators
and pressure vessel and so on.
TYPE OF HEAT
TRANSFER PLATE
â— High turbulent flow
â— High heat transfer coefficient
â— Perfect temperature approach
â— High pressure drop
LOW-THETAPLATE
â— Low turbulent flow
â— Low heat transfer coefficient
â— High temperature approach
â— Low pressure drop
CHANNEL
COMBINATION
There classes of channel with high theta plate and Iow theta plate
are possible．
High Channel
Combination of two Iow-theta heat
plates
Low Channel
Combination of one high-theta plate
& one low-theta plate
HIGH EFFICIENCY
High efficiency of heat transfer
coefficient depends on the sheet halves of the internal structure
of the corrugation, in order to reach the most effective channel of
the inclined turbulence effect, to form a countercurrent heat
exchanger to reduce the volume of fluid retained in the sheet, the
optimum for effective thermal effects. BAVI plate heat exchanger
heat transfer rate is more than five times the shell and tube heat
exchangers, heat transfer efficiency is usually higher than peers
plate heat exchanger more than *0%.
WIDE CONTACT AREA
Our product of pressed plate, "double
herringbone" shaped embossed sheet is stronger than other
companies; it is strengthen the smooth bottom plate of the wave.
Avoid the dead zone phenomenon generated by the fluid flowing
through the plate films. Plate contact area between the plates is
larger than ordinary plates. The same size plate relatively strong
anti-stress, they form minimized. And prolong the plate useful
life.
The cross-sectional area of the gasket
design is to maintain its elasticity while in contact with the
liquid is minimized. This design has a great impact on the gasket
plate and durability, and further increase the internal pressure
affects. Plate with gasket groove, outer edges of gasket groove
with a good support to the plate, ensure the position of the gasket
along any direction.
BAVI—CLIP GASKET
Our company made good optimized for
the cross-section of the sealing gasket, with the pair of fixed
devices rapidly and stably attached to its optimal state. Sealing
gasket into the form of an adhesive type, free bonding type (snap
on or clip in), according to their different applications, both
using glue and non-glue bonding.
EASY DISASSEMBLY AND ASSEMBLY
One or two people will be able to
disassemble and re-assemble a very large heat exchanger. Novice can
be removed and the assembly of the plate will not slip or
dislocation, as plug-in plate is mounted in combination, and the
design is also a fixed structure of the plug-in seal. (Such as high
viscosity materials, oil cooler, oil heater maintenance is
particularly impressive.)
TEMPERATURE APPROACH
Most of shell and tube heat exchanger
in the minimum temperature difference of 5℃,
plate heat exchanger is usually the minimum temperature difference
is greater than 3℃,
while BAVI saving energy in the plate heat exchanger is usually
minimal less or equal to 1℃
temperature difference can equal a
good run.
Jiangsu BAVI Eng. &Tech
Co., Ltd has different corrugation, shape and size heat
exchanger plate, there are many kind of combination. Our company
technicians choose the most efficiency and cost optimal one
according to different working condition and requirements. Ensure
our heat exchanger can use in different complex
condition.
AS pioneer of energy saving technologies and
products supplier, BAVI ENGINEERING provides key technologies and
products for varies of products and tools manufacturing process,
including high efficiency plate heat exchangers, compact heat
exchanger module, fuel gas heat recovery system, lube oil
purification system and oil circulation lubrication system. BAVI
ENGINEERING is devotion itself to the continuously social
development and living improvement of the
world.
| بلد: |
China |
| نموذج رقم: |
BVP-50
|
| سعر فوب: |
( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
- |
| سعر الحد الأدنى للطلب: |
- |
| الحد الأدني للطلب: |
1 Set |
| تفاصيل التغليف: |
Seaworthy Wooden Case |
| موعد التسليم: |
7 to 15 Days |
| القدرة على التوريد: |
500 Set per Month |
| نوع الدفع: |
T/T, L/C, Western Union |
| مجموعة المنتج : |
Gasketed Type Heat Exchangers
|
