الوصف
Conductor: Solid or Class B compressed concentric lay stranded ***0
aluminum meeting the requirements of ANSI/ICEA S******2.
Conductor Shield: Extruded semi-conducting thermosetting polymeric
stress control layer.
Insulation: Extruded Ethylene Propylene Rubber (EPR) Class II and
III as defined in ANSI/ICEA S******2.
Insulation Shield: Extruded semi-conducting thermosetting layer,
clean and free stripping from insulation.
Copper Wire Shield: Helically applied annealed solid bare copper
wires with a lapped non-metallic tape serving as a
binder/separator.
Jacket: Black, non-conducting, sunlight-resistant (PVC) or
LLDPE.
Triple-extruded for clean interfaces
Flexibility for easy handling
Excellent moisture resistance
Deformation-resistant
Sunlight-resistant
High dielectric strength
Low dielectric loss
Excellent resistance to water treeing
Clean-stripping insulation shield without the use of a release
agent
Standard: ANSI/ ICEA S******2 and AEIC CS8
Medium Voltage Fill Shield Power Cables are intended for use in dry
or wet locations for distribution of three-phase medium-voltage
power. Because it's filled with shield, these medium voltage cables
may be installed in ducts or direct buried.
بلد: |
China |
نموذج رقم: |
-
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
- |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
- |
نوع الدفع: |
PayPal, L/C, T/T |
مجموعة المنتج : |
- |