Buying of iron ore nickel ore

RFQ Details

CLAUSE 3.​SPECIFICATIONS: (On dry basis)
Clause 3. Specifications: (dry basis)
​​
Standard Chemical composition
Chemical Composition
Guaranteed (% by weight)
Guaranteed (weight percent)
Fe
iron
62% min, reject below 60%
62% least, less than 60% rejected
SILICA SiO2
silica
4.00% max, reject above 5.5%
4.00% maximum, above 5.5% reject
Al2O3
Aluminum oxide
3.0% max, reject above 4.0%
3.0% maximum, above 4.0% reject
Phosphorus (P)
phosphorus
0.07% Max, reject above 0.1%
0.07% most, above 0.1% reject
Sulphur (S)
0.07% Max reject above 0.10%
0.07% maximum, above 0.10% reject
TiO2 Titanium Dioxide
0.03% Max reject above 0.10%
The maximum value is 0.03%, more than 0.10% will be rejected
Na2O+K20Sodium oxide+Potassium oxide
0.25% Max reject above 0.30%
The maximum value is 0.25%, more than 0.30% will be rejected
Zn
0.03% Max reject above 0.10%
The maximum value is 0.03%, more than 0.10% will be rejected
Moisture loss at 105 degrees centigrade. 105
Moisture, moisture loss at 105 degrees Celsius
8.0% Max
8.0% max
Physical Composition Specifications
0-10mm 7.0% Max max
10mm-40mm 93% Min minimum


Physical LUMP SIZE Specification physical block size specification
~ 40mm (smaller than 40mm)

If the above-mentioned elements are over their maximum specifications or below their minimum specifications (Lump size and FE), the buyer has the right to reject the cargo.
Buyer reserves the right to reject if the above elements exceed their maximum specifications or fall below their minimum specifica