Motorized valves

RFQ Details

MV12P series motorized valves are used to control the opening or closing
for the pipe in the chilled/hot water system so to control the room
temperature. The valve is driven by hysteresis synchronous motor with
spring return. It is normally close ball valve.
When the thermostat is working, it will provide an opening signal, and the
motorized valve will be opened. Then the chilled/hot water enters the coil
and the coil starts to supply the cold/warm air to the room. When the room
temperature rises to the set point, the thermostat will cut the valve power off.
At the same time the valve will be closed by return spring and shut off the
water to the coil. The room temperature will be kept in the setting range all
the time through the opening and closing the valve.
The switch of the 2-way valve is only used as auxiliary switch for the output signal. The 3-way valve
with 2 or 3 auxiliary switches is 3-point valve.
MV12P series motorized valves have detachable and non-detachable types. The detachable valve
actuator and valve body is connected with supporting axis and matching button. It is convenient to
install and be wiring for the valve actuator can be installed after the installation of the valve body.