1/8B-316SS0.5,0.5 nozzle,B hollow cone spray nozzle

الوصف

1/8B***6SS0.5,0.5 nozzle,B hollow cone spray nozzle    

【YBS Nozzle】offer 1/8B***6SS0.5,0.5 nozzle,B hollow cone spray nozzle and other products.Tel:***************1    
        
B hollow cone spray nozzle is made of  brass ,stainless steel or PVC .The metal models has the long working life and the PVC models has the 

good corrosion performance.

Hollow cone nozzle installation process

When the annular pipe outside dimensions of the workpiece by the composition of a certain arrangement of the installation of certain hollow 

cone nozzle surrounds the workpiece , the workpiece through the spray zone , all

Bath surface can be spray , spray the entire area should be evenly arranged hollow cone spray nozzle to ensure that the process time and 

effect. Hollow cone nozzle distance from the workpiece, should be within the range of the jet 's best diffusion , for hollow cone nozzle and 

nozzle arrangement should be reasonable . The distance between the nozzle and the hollow cone nozzle is **0mm ~ **0mm, cross 

arrangement , the distance between the hollow cone nozzle and the workpiece is preferably not less than **0mm. > Dip coating treatment 

before stirring device into the pipe from the pump to stir hollow cone nozzle , constitute a complete bath injection system. Stirred using a 

hollow cone nozzle venturi principle , a bath under the action of pressure into the duct , formed by high-speed stirring jet hollow cone nozzle 

spray holes and creates a low pressure zone in the lead around the crossing hollow cone nozzle , forming a siphon , the bath is sucked into the 

hollow cone nozzle stirred under a pressure difference , so that large quantities of liquid can be recycled . Stir hollow cone

Nozzle distance from the bottom of *5mm ~ *5mm, the distance to the workpiece is **0mm ~ **0mm, the spray angle should be determined 

according to the hole size of the workpiece . When the width of the workpiece is small , the nozzle holes can be designed vertically upward , 

when the workpiece is large , the nozzle holes can be designed to the vertical *5 ° ~ *5 °; when the width of the workpiece is large , to 

improve the stirring effect , the vertical spray orifice can be designed down , but this will precipitate was stirred up , it only applies to non- 

precipitate was stirred bath .

In the process of manufacturing, B hollow cone spray nozzle is used to cool gas.

Ordering information of B hollow cone spray nozzle(YBS brand)
Materials: None=brass  
               I=mild steel    
               SS=**3 stainless steel
               **6SS=**6 stainless steel
               PVC=polyvinyl chloride 
1/8    1/8B-SS0.5    1/8B-I0.5        1/8B-SS0.5    1/8B***6SS0.5        1/8B-PVC0.5
    1/8B-SS1        1/8B-I1        1/8B-SS1        1/8B***6SS1        1/8B-PVC1
    1/8B-SS2        1/8B-I2        1/8B-SS2        1/8B***6SS2        1/8B-PVC2
    1/8B-SS3        1/8B-I3        1/8B-SS3        1/8B***6SS3        1/8B-PVC3
    1/8B-SS5        1/8B-I5        1/8B-SS5        1/8B***6SS5        1/8B-PVC5
    1/8B-SS8        1/8B-I8        1/8B-SS8        1/8B***6SS8        1/8B-PVC8
    1/8B-SS*0    1/8B-I*0        1/8B-SS*0    1/8B***6SS*0        1/8B-PVC*0