الوصف

*2 V hopping code security wireless remote control switch 2 road receiver Motor  and reversing the wireless receiver

Encryption type: data encoding uses the rolling code

Product specification: 

*2 V hopping code security wireless remote control switch 2 road receiver motor and reversing the wireless receiver learning (*2 V + 1 remote control)

DC*2V remote control receiver product introduction

V1.2 version

Description:

The remote control switch is suitable for anti-theft alarm system, electric doors & windows, motor control, all kinds of industrial control signal circuit and so on.

Its suitable for control of all kinds of load, the product uses the learning function of encryption technology.

Interference.

Receiving plate can bear the biggest *0 A current, the ac load can be directly driven each relay with a set of normally open /closed. In order to lengthen the service life of the receiving plate, it is recommended that users don't control high power load, the control of **0 V electrical appliances.

Every road control maximum **0 W (inductive load).Control the *2 V electrical, suggested that every road control maximum *0 W.

Basic info:

(1). Working voltage: DC*2V

(2). working frequency: **3 MHZ

(3). Contact capacity: *0 a / **0 vac or less;*0 a / *0 VDC

(4). Receiving sensitivity: > **5 db

(5). Remote control distance: **0 ~ **0 meters (clearing without interference) for empty no interference theory of distance, the distance will be according to actual use

Different environment (temperature, humidity), walls, obstacles such as trees, the general theory of distance of *0% ~ *0%.

(6). Control way: 2 way

(7). Encoding types: encryption type.

(8). Interlock/locking/point move to explain the meaning of:

Interlock: press a key, the corresponding relay on, then press another key, relay disconnected, before another relay through.

Point move: by a remote control, relay connect only once; According to the remote control, relay will switch once;

Self-locking: press a remote controller, relay switch on, press it again, disconnect the remote control.
Note: the factory default inching mode as well as changes to the relay output mode, you have to restart the system.