سعر فوب
أحصل على آخر سعر6 ~ 10 / ( Negotiable )
|200 Set Minimum Order
بلد:
China
نموذج رقم:
EW-AT001
سعر فوب:
6 ~ 10 / ( Negotiable )أحصل على آخر سعر
الموقع:
-
سعر الحد الأدنى للطلب:
6
الحد الأدني للطلب:
200 Set
تفاصيل التغليف:
blow case+logo labe+carton
موعد التسليم:
within15-45days
القدرة على التوريد:
200000 Set per Month
نوع الدفع:
T/T, L/C
مجموعة المنتج :
-
China
الشخص الذي يمكن الاتصال به Mr. luca
zhong shang, shanghai
*2pcs disc brake caliper kit (EW-AT**1)
_This tool is used to wind back brake caliper pistons when
servicing brack caliper or replacing brake pads
_Good quality ,including left and right hand threaded rewind tools
allow the easy return of the brake piston into the caliper to
provide clearance for new brake pads
_Application for most cars .such as audi ,Fod ,BMW,tYOTA,Nissan,VW
,GM etc
Detailed specification :
1 right or left spindler thread
1 reaction plate
*0 brake piston adapters
Material:#*5steel or *0cr if you need heat treatment is ok
.
Packing:color logo label +film + carton packing
Meas:*6x*4x*7cm/*0sets *9kg
ITEM NO. | EW-AT**1 |
CONTECTS | 1 RIGHT HAND THREADED REWIND TOOLS 1 RELATION PLATE *0 BRAKE PISTON ADAPTERS |
PACKAGE |
MEAS:*6X*4X*7CM,*9/*8KGS |
1.Remove the brake caliper from the wheel knuckle that it's
mounted to. Be sure to support it on something or with a wire
hanger so that the brake hose doesn't get damaged.
2.Remove the outer brake pad but leave the one on the piston side
attached.
3.Retract the screw on your disc brake piston tool and slide its
plate into place where the outer pad used to be, lining the
retracted screw up with where the piston is behind the other
pad.
4.Use the attached handle to screw the screw part of the tool
towards the pad. As you do this, you will see the piston-side pad
begin to retract.
5.Do this until the pad is flush with the caliper, ensuring the
piston is fully retracted.
6.Remove your disc brake piston tool and the piston-side
pad.
7.Once the caliper has been retracted back into its bore, you can
move on to installing your new brake pads and rotors, which will
now easily slide over each other. Be sure to press the brake pedal
a few times before moving the car, to re-seat the pads against the
rotors.
بلد: | China |
نموذج رقم: | EW-AT001 |
سعر فوب: | 6 ~ 10 / ( Negotiable ) أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | 6 |
الحد الأدني للطلب: | 200 Set |
تفاصيل التغليف: | blow case+logo labe+carton |
موعد التسليم: | within15-45days |
القدرة على التوريد: | 200000 Set per Month |
نوع الدفع: | T/T, L/C |
مجموعة المنتج : | - |