16W Portable solar kit,portable solar panel kit

*6W Portable solar kit,portable solar panel kit

*6W solar panel kits home which designed for the small family. All the power comes from solar. Clean, environment protection.

This system is usually used for home lighting/house lighting,remote area, mountainous area, desert area, grassland area,village, country area,camping, outdoor activities, travelling,Lighting at night.

*2AH DC LED solar kits for home components:
1.Solar module: *2V/*6W. With 8m cable and 2.1mm DC port,poly crystalline. (one set)
2.LED lights, *2V/3W, white color. With 4m cable and 2.1mm DC port. (two sets)
3.Battery box with controller built-in. (one set)

Technical Data

Installing and Operation

1 Open the box and take out the accessory and machine.Put the solar panel outside and make it face the sun;connect the cable with the machine indoor; put on the switch. If the battery voltmeter has display and red charging indicator is on, it means the solar panel is charging the battery normally. (If this is the first time you use this machine, please charge for 3 continuous days and then discharge the load)

2 If the battery voltage is higher than *0.5V, the load indicator will be on.Then insert the LED lamp into the socket of the DC output on the machine. And insert the mobile into the USB connecting port.

3 This machine has anti-discharging function(prevent battery from discharging to solar panel), so please make sure the solar panel is always connected with the machine to assure the battery can get more power. If you use the battery for long, it would cause the battery to low voltage condition (load indicator off, no load output. The voltmeter showing at *0V). If this happens, please use the solar panel to charge the battery for *0 continuous hours and restart the machine to recover the power supply.

4 If the battery voltage is higher than *4V, the charging indicator begins to flicker, and it means the battery has been in float charging state.

5 We have fully considered the using condition of the users. The cables&#x***9; length for solar panels and LED lamp are long enough, so please do not lengthen them or change them at random. But if you have to change them, please make sure the area of the cable connecting solar panel is not less than 0.5mm2, while for LED lamp, not less than 0.3mm2. All the connecting cables have negative and positive part, please distinguish them.

Breakdown and disposal
1 Solar panel indicator off: Please check whether the solar panel is facing the sun; whether the machine switch is on; whether the battery is in full capacity state; whether the connecting of the solar panel is short-circuit or reversed.

2 No load output and the load indicator off: Please check whether the battery is in low voltage, whether the voltmeter showing is less than *0V and if it so, please charge the battery for *0 continuous hours and then use it.

3 No load output, load indicator on: Please check whether there is bad connection of the load, then connect again. Check whether the load is overloaded, short-circuit, and disconnect the load for 1 minute, then connect again.

*6W Portable solar kit,portable solar panel kit