سعر فوب
أحصل على آخر سعر|
- Minimum Order
بلد:
China
نموذج رقم:
-
سعر فوب:
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
-
تفاصيل التغليف:
-
موعد التسليم:
-
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
-
China
الشخص الذي يمكن الاتصال به Wendy
Zhongshan, Guangdong
Attention:
Please do not pay
before we quote you .The picture and prices shown are just for
exhibition, pleaseadvice us of your
requirements, before we can submit a quotation
Pleases send your STL file to us
We shall reply you
ASAP
Selective Laser
Sintering(SLS) machines running Polyamide (Nylon).
Selective laser sintering prototype is perfect for your first off
functional model.
Our model shop can apply a very high quality
primed or painted finish.
Our main objective is to save you time and money,
so that you get your products to market as quickly as possible,
within budget.
Selective Laser Sintering (SLS)
Process
1.
Import STL file to SLS
system.
2.
Object is sliced into separate
layers.
3.
Each layer of the object is scanned by
CO2 laser and sintered.
4.
New layer is bonded to the previous
sintered layer. The steps are repeated until the object is
completely built.
Material information
PA GF is a whitish, glass-filled
polyamide *2 powder, which is characterised by an excellent
stiffness in combination
with good elongation at
break.
Laser-sintered parts made from PA GF
possess excellent material properties:
• high stiffness
• high mechanical
wear-resistance
• good thermal
loadability
• excellent surface
quality
• high dimensional accuracy and detail
resolution
• good processability
• excellent long-term constant
behaviour
A typical application for PA GF is the
usage e.g. for final parts within the engine area of cars, for
deep-drawing dies
or any other application which requires
particular stiffness, high heat distortion temperature and low
abrasive wear.
PA
This whitish fine powder PA on the basis
of polyamide *2 serves with its very well-balanced property profile
a wide
variety of
applications.
Laser-sintered parts made from PA possess
excellent material properties:
• high strength and
stiffness
• good chemical
resistance
• excellent long-term constant
behaviour
• high selectivity and detail
resolution
• various finishing possibilities (e.g.
metallisation, stove enamelling, vibratory grinding, tub colouring,
bonding, powder
coating, flocking)
• bio compatible according to EN ISO ******1
and USP/level VI/**1 °C
• approved for food contact in compliance with
the EU Plastics Directive ***2/*2/EC (exception: high alcoholic
foodstuff)
Typical applications of the material are fully
functional plastic parts of highest quality. Due to the excellent
mechanical
properties the material is often used to
substitute typical injection moulding plastics. The
biocompatibility allows its use
e.g. for prostheses, the high abrasion
resistance allows e.g. the realisation of movable part
connections.
**0μm layer thickness
The advantage of the Balance parameter set is
equilibrium. The layer thickness of **0μm offers a perfect balance
between
production costs, mechanical properties,
surface quality and accuracy. It is therefore suitable for parts
with varying
geometries, dimensions and
requirements.
For more information on our range of services and
materials, please contact us
atby email
| بلد: | China |
| نموذج رقم: | - |
| سعر فوب: | أحصل على آخر سعر |
| الموقع: | - |
| سعر الحد الأدنى للطلب: | - |
| الحد الأدني للطلب: | - |
| تفاصيل التغليف: | - |
| موعد التسليم: | - |
| القدرة على التوريد: | - |
| نوع الدفع: | - |
| مجموعة المنتج : | - |
