الوصف

Model No.:LT-C*3CW**0

Colour Temperature:********0K or ********0K

Aluminum base size:*0mm

Luminous face size :*0mm

 Input Current:**0mA

Voltage range:***0V

Luminous Efficiency:******0lm/W

Chip Brand:FOREPI

 Characteristics:

Low heat resistance,
Low optical attenuation ( less than 3% after ***0 hours)
Less auxiliary parts ,High cost performanceHigh color Rendering Index
Easy to assemble into the finish LED lights,Reduce the production processAccording to the customer requirement,
OEM & ODM are welcomed!Application:led down light ,led ceiling light,led bulb,led mining lamp,led spotlight, etc.

 Cautions:

1)tatic Electricity: You need to take the protective measures for the product being sensitive to staticelectricity. It can lead to product damage or even the total invalid When the high voltage current made by static electricity is beyond the maximum rating. The ground resistance can’t beyond *0Ω.By using anti-static-electricity bracelets/ cushions/ overalls/ shoes/gloves and anti-static-electricity containers, it can effectively prevent static electricity and surge.The soldering iron point should be properly grounded.
2)soldering:a, Use soldering by hand:Recommend using soldering iron which power is less than *0W and temperature is not higher than **0 °C. Soldering time is not more than three seconds each time.b, Reflow soldering: (a),Recommend setting according to the temperature curve of the right picture.(b),After the soldering, the product temperature will drop to the room temperature, careful processing of products is necessary.3)Cleaning:After the soldering, the cleaning need to made according to the following conditionsa,Cleaning agent:Isopropanol or industrial alcohol (>*5 °).b, Temperture limite: When the cleaning time is in the *0 seconds , the temperature can’t higher than *0°C , if it is in the 3 minutes, the temperature can’t higher than *0°C.c,Ultrasonic cleaning: MAX **0W4)Others.a. Any time, don't touch colloid part, lest product surface come to be damaged or even invalid.b. The storage environment humidity should less than *0% and the temperature should be constant, which will lead to avoid the temperature changes not more than *0°C.