الوصف

Performance Parameter

 

Accessories for products:
1. One standard AC wire
2. One user manual

Installation: 
1. Red terminal: Connect DC positive, black terminal: Connect DC negative.
2. AC socket: Connect to the mains. Put the side of the AC cord which has holes into the inverter with 3 foot outlet and the other side of the AC cord to home AC outlet.
3. In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid
inverters **0W stacked can achieve ***0W. And the number of the stacking is unlimited.

LED indicator: 
1. 1 Red LED:
1) Low-voltage protection ( DC voltage is less than *0.8VDC or *2VDC).
2) Over-voltage protection ( DC voltage is greater than *0VDC or *0VDC).
3) Over-temperature protection (when the internal temperature is above *5 ℃ , there will be
over-temperature protection. When the working temperature drops to *0℃ , the inverter restarts
automatically after cooling).
4) AC protection (when home grid is lower than *0VAC or higher than **0VAC [for **0VAC], or when
home grid is lower than **0VAC or higher than **0VAC [for **0VAC], the micro inverter will not
work.
5) Anti-Islanding protection: When the electric supply stop, the inverter automatically shut down output.
2. 3 Green LEDs:
The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected.
This indicates the inverter is operating under normal condition. The rate of cycling is according to how
much power is being output from the solar panels or the wind turbine. The bigger output power, the
faster the rate is.

Warning:
▲ Do note the operating voltage range is *0.***0VDC or ****0VDC. It will be not work normally if the  voltage is wrong.
â–² No dismantling without authorization
â–² Please install inverter in the low humidity and well-ventilated place to avoid the overheating, and clear
around the inflammable and explosive materials.
▲ Use the inverter out of children’s reaching place to avoid electric shock.
â–² Connect the AC terminal to AC power socket.
â–² Connect the DC terminal to solar panel or battery.