يبدو أنك لست عضوًا في TradeKey.com بعد. اشترك الآن للتواصل مع أكثر من 7 مليون مستورد ومصدر عالميًا.
انضم الآن ، مجانًا |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
product
Prev
addition cure liquid silicone rubber raw material for mold making addition cure liquid silicone rubber raw material for mold making addition cure liquid silicone rubber raw material for mold making addition cure liquid silicone rubber raw material for mold making addition cure liquid silicone rubber raw material for mold making
Next

addition cure liquid silicone rubber raw material for mold making

7.5 ~ 12 / Kilogram ( Negotiable )

|

100 Kilogram Minimum Order

بلد:

China

نموذج رقم:

G-830 addition cure silicone rubber

سعر فوب:

7.5 ~ 12 / Kilogram ( Negotiable ) أحصل على آخر سعر

الموقع:

China

سعر الحد الأدنى للطلب:

7.5 per Kilogram

الحد الأدني للطلب:

100 Kilogram

تفاصيل التغليف:

20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B 25KG/drum vacuum packing f

موعد التسليم:

3 to 5 days

القدرة على التوريد:

500 Ton per Month

نوع الدفع:

Other, PayPal, Western Union, L/C, T/T

مجموعة المنتج :

الاتصال الآن
عضو مجاني

الشخص الذي يمكن الاتصال به Ms. Sybil

NO.4 shichang street , the 2nd industrial district of xiaobian ,changan town ,dongguan China., Dongguan, Guangdong

الاتصال الآن

الوصف

1.Description of addition cure liquid silicone rubber 
G***0 silicone rubber platinum cure silicone rubber. The silicone rubber will be cured under room temperature and can be cured fastly by heating, Its two-components liquid silicone rubber , the mixing ratio is 1:1 . It has an exceptional fluidity and good operability.Especially ,the platinum cure silicone rubber has a lower shrinkage,higher temperature resistance and it is flexible.

2.Characteristics of addition cure liquid silicone rubber  
(1).An exceptional fluidity and good operability 
(2).Good tensile strength and tear strength
(3).Food grade silicone rubber

(4).high temperature resistance
(5).good flexibility

(6).No smell ,non-toxic
(7).long shelf-time &lifetime
(8).Lower shrinkage

3.Application of addition cure liquid silicone rubber  
G***0 silicone rubber is flexbile silicone rubber ,it has a higher temprature resistance and lower shrinkage, so it is suitable to make the silicone gasket for machine sealing .4.Datesheet of addition cure liquid silicone rubber  
 

Item No. Appearance Hardness (shore A°) Viscosity (CPS) Tensile-strength
( kgf /cm2 )
Tear-strength
(kgf /cm2 )
Elongation-break
(%)
Mixing ratio operation
time (*5℃ )
Curing time( *5 â„ƒ) Shrinkage
G***0 translucent *0±2 ***0±***0 *5 *4 **0 1:1 ****0 mins 2~3 h 0.1%

Using instruction
1. Place a plastic container on a small scale, making sure to zero out the weight on the scale. Note: use a container that, during rise under vacuum in Step 5, will allow for material to expand to **5 times its resting volume.
2. Pour catalyst into the plastic container, noting weight of material poured.
3. In the same container, pour an equal weight of base on top of the catalyst (e.g., **0 grams of catalyst and **0 grams base). Note: within a 5% weight variance, the end result is not altered.
4. With a clean, dry mixing spatula, mix energetically until the color of the product is homogeneous. Note: working time begins at this step. Mixing should take no longer than **2 minutes.
5. Place container under vacuum and vacuum until material bubbles and rises. Release vacuum and repeat until bubbles are removed. Vacuuming should take no longer than **4 minutes.
6. From a height of approximately *0 cm, pour the mixed silicone into the mold frame. Maintain the pouring stream in the same spot so as to minimize introduction of air bubbles into the mold.
7. Allow the mold to sit, undisturbed, for at least 4 hours to ensure the silicone is fully cured.
8. Remove the mold from the frame.
9. Cut around the pattern carefully to release it from the silicone rubber mold. 
Notice
The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.
Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.
Be aware of possible cross-contamination; its highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).
Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:
-Natural or synthetic rubber, vulcanized with sulphur derivatives.
-Poly-condensation RTV catalyzed with metallic salts.
-PVC stabilizing agents.
-Amine cured epoxies.
-Sulphur, tin and amines derivatives.
-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object. 

Packaging & Shipping
Packing:
*0KG/drum vacuum packing for part A + *0KG/drum vacuum packing for part B
*5KG/drum vacuum packing for part A + *5KG/drum vacuum packing for part B
**0KG/drum packing for part A ***0KG/drum packing for part B 
Why Choose Us?
1.Free Sample   
2.Sample Test    
3.Technical Support    
4.Engineers Site Instruction
5.New products developing     
6.New Market developing
7.Factory Visiting Reception    
8.China visiting reception    
9.China Latest silicone news
*0.Related Products Purchasing Assistance
*1.More than 8 years experience in producing liquid silicone rubber
 

بلد: China
نموذج رقم: G-830 addition cure silicone rubber
سعر فوب: 7.5 ~ 12 / Kilogram ( Negotiable ) أحصل على آخر سعر
الموقع: China
سعر الحد الأدنى للطلب: 7.5 per Kilogram
الحد الأدني للطلب: 100 Kilogram
تفاصيل التغليف: 20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B 25KG/drum vacuum packing f
موعد التسليم: 3 to 5 days
القدرة على التوريد: 500 Ton per Month
نوع الدفع: Other, PayPal, Western Union, L/C, T/T
مجموعة المنتج : addition cure silicone rubber

Send a direct inquiry to this supplier

إلى:

Ms. Sybil < Dongguan Guochuang Organic Silicone Material Co., Ltd. >

أريد أن أعرف: