Addition cure rtv silicone for food mold making

سعر فوب

أحصل على آخر سعر

9.88 ~ 12.8 / Kilogram ( Negotiable )

100 Kilogram Minimum Order

بلد:

China

نموذج رقم:

E615

سعر فوب:

9.88 ~ 12.8 / Kilogram ( Negotiable )(قابل للتفاوض) أحصل على آخر سعر

الموقع:

سعر الحد الأدنى للطلب:

9.88 per Kilogram

الحد الأدني للطلب:

100 Kilogram

تفاصيل التغليف:

20kgs/ drum, 25kgs/drum, 200kgs/drum, 1kg to 5kgs per Jar

موعد التسليم:

within 3 days after payment confirmed in our bank

القدرة على التوريد:

8000 Kilogram per Day

نوع الدفع:

PayPal, Western Union, L/C, T/T

مجموعة المنتج :

platinum cure silicone rubber

الاتصال الآن

ShenZhen Hong Ye Jie Technology Co., Ltd

China

عضو مجاني

الشخص الذي يمكن الاتصال به Ms. JoJo

Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong

الاتصال الآن

مواصفات المنتج

Application:food mold making
Color:white
Mix ratio:1:1 or 10:1
Catalyst:platinum catalyst
Hardness:10-35 Shore A of silicone rubber
Certificates:FDA,REACH,MADS,SGS,ROSH

الوصف

Addition cure rtv silicone for food mold making

Applications:

E615 series food safe mold making silicone rubber could be mainly used for chocolate mould, candy mould, biscuit mould, nougat mould, fudge mould, fondant mould, sugar mold, tallow mold, and so on.

Characteristics:

- Low shrinkage, so the shape of your target product will be exactly what you want(less than 0.1%)

- Reusable for your food mold, which can save your money and time.

- Favorable for molding and demolding. (mixing ratio at 1:1 /10:1)

- Easy to get cured.

- Able to copy every fine detail on the original food model, which will make your food(e.g. chocolate mold, biscuit mold)

Technique Datasheet for this food safe silicone

Model	E615
Appearance	Translucent
Hardness(shore A)	15±2
Mix ratio (A:B)	1:1
Viscosity (mPa.s)	8000±2000
Tensile-strength (MPa)	4.2
Tear-strength (kN/m)	12±2
Elongation (%)	470
Density(g/cm3)	1.05
Shrinkage rate(%)	0.1
Pot life (mins)	20-40
Curing time (hrs)	3-5hrs(25â„ƒ) / 20-30mins(60â„ƒ)

Operation instructions of HY- E series molding silicone rubber:

1. Please clean your original model(mother model) before you begin your mold making operation.

2. Weigh suitable amount of E615 silicone.

3. Mixing the two parts by the ratio of 1:1/10:1 and mix part A and part B evenly in 2-3 minutes.

4. And get the mixture for vacuum-pumping for de-air the bubble in about 2-3 minutes.

5. Fix the mother model onto a clean wooden board.

5. Build a mold frame with four plastic plates or wooden plates, sealing the gap.

6. Release agent should be applied onto the productssurface.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame.

8. When the silicone mixture gets cured, a clear silicone mold will come out!

Notice:

E615 silicone is platinum cure type, so please avoid contact it with the following material:

1. Condensation cure silicone

2. Sulphur, sulfide.

3. Amine compounds as well as contains the amine materials.

4. Pewter solder flux.

Packing:

بلد:	China
نموذج رقم:	E615
سعر فوب:	9.88 ~ 12.8 / Kilogram ( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	-
سعر الحد الأدنى للطلب:	9.88 per Kilogram
الحد الأدني للطلب:	100 Kilogram
تفاصيل التغليف:	20kgs/ drum, 25kgs/drum, 200kgs/drum, 1kg to 5kgs per Jar
موعد التسليم:	within 3 days after payment confirmed in our bank
القدرة على التوريد:	8000 Kilogram per Day
نوع الدفع:	PayPal, Western Union, L/C, T/T
مجموعة المنتج :	platinum cure silicone rubber