Addressable APA102 led digital pixel strip, 60 pixels tape

الوصف

Addressable LED Strip APA102-C, 5 meters, 60 LEDs/meter

30 leds, 32 leds, 60 leds, 72 leds and 144 leds are all available.

Individually addressable LED strip based on the APA102-C ,Super LED, integrated RGB LED and driver. The strip is powered by a 5V power supply (not included) and is controlled by a clock+data signal from a suitable controller (not included), for example Teensy 3, Arduino, Raspberry Pi, PixelPusher or similar microcontroller/computer. Compatible with the FastLED library. 4-pin JST connector included: Red:5v, Yellow:DATA, Green:CLK, BLACK:GND. The strip with non-waterproof,it has a 3M adhesive tape on the back. Installation surface must be smooth, clean and dry. If the strip with waterproof,it has a silicone tube to protect the water.Strip can be cut between every LED to create custom lengths. Do not bend strip sharply. Do not exceed 5 meters in a single circuit. Longer runs should be powered from both ends to reduce voltage drop.

•APA102-C integrated RGB LED and driver
•5V DC
•72W max
•60 LEDs/meter
•White or black flexible PCB