الوصف

AE***0 Megohmmeter:
-dependable and easy to use
-using in all facets of material production
-built-in electrodes

AE***0 Megohmmeter

INTRODUCTION

The AE***0 Megohmmeter is a dependable and easy to use audit kit for conductive and dissipative surfaces. This meter is designed to be used in all facets of material production including engineering, maintenance, quality control, incoming inspection, manufacturing, research, or sales departments for testing of anti-static mats, floor finishes, paints, wrist straps, smocks, foot wear, bags and containers.

When using the built-in electrodes, the meter’s test values for surface resistivity are in ohms per square. When using the external five pound electrodes, the meter’s test values for resistance are in ohms (although they are displayed in ohms/sq).

The AE***0 Megohmmeter kit measures surface resistivity, resistance, temperature and humidity. It is designed to test conductive, anti-static, and static dissipative surfaces for electrical resistivity/resistance according to EOS/ESD, CECC, ANSI, ASTM and UL test procedures.

The internal parallel electrodes comply with DIN EN **0 **5/1 & ANSI/ESDA-S*1.*1. The five pound electrodes can be externally connected for tests according to IEC ********1, ANSI/ESDA S4.1 & ANSI/ESDA S7.1.

AE***0 Megohmmeter Includes:

Tester

Two 5lb probes

One ground cord

Two accordion cables (monaural to banana)

**0 power adapter*

9 volt battery

Foam lined carrying case

Certificate of calibration

*AE***0 Celsius models come equipped with **0v power adapter unless specified

AE***0 Optional Accessories

Concentric Ring Probe

Miniature Ring Probes

Garment Clips for smocks

Limits

Resistivity: *03**0*2 ohms/sq

Resistance: *03**0*2 ohms

Relative Humidity: *0% - *0% RH

Temperature: 0°C– *7.7°Cif Celsius model was purchased

Measuring voltage: *0v and **0v

DECADE SCALE

*03                =          1 kilohm

*04                =          *0 kilohms

*05                =          **0 kilohms

*06                =          1 meg ohm

*07                =          *0 meg ohms

*08                =          **0 meg ohms

*09                =          ***0 meg ohms

*0*0               =          *0,**0 meg ohms

*0*1               =          **0,**0 meg ohms

*0*2               =          1,**0,**0 meg ohms

The test value is indicated on the LCD display. Unlike meters with LEDS that indicate only the decade the measured value falls within, the AE***0 will show the actual value.

*7 ohms (2.7x*07) is displayed as 2.7 e*7 ohms/sq