الوصف
SKYPE :
mfbalmustafa - Mobile : + *0 **5 **0 *1 *5 ( Whatspp, viber
..)
AIRKOM OIL
FREE & OIL FREE HIGH PRESSURE
PISTON AND SCREW TYPE
*-
Food and beverage, medical, laboratory and industry and wherever
oil-free air is required
*-
Pistons and piston rings made of corrosion and high temperature
resistant special Teflon coated material
*-
It does not require maintenance (excluding air filter) for *0,**0
hours (or four years)
It
is designed based on oil free operation principle according to 8.5
/ *0/*4 bar operation pressure and power range from 0.*5kw up to
*1kW.
Compressor block is supplied by the Japanese
Annest Iwata Company. It is driven by V-belt
pulley.
V-belt tension is easily adjustable with belt and
pulley tensioning system.
The
compressor is started directly with motor protection switch up to 4
kW motor power types, and with star-delta control panel up to 5.5kW
motor power types and more.
Compressor is driven with F proof, IP*5
protected, IE2 efficiency asynchronous electric
motor.
The
cabin is designed according to the most appropriate operating
conditions: Vibration is minimized by use of rubber wedges in
various sections. Noise is reduced to a minimum with non-flammable
sound insulation foam covered on the cabin's interior surfaces.
Facilities are provided to make easy service applications with push
on-off-locking system mounted on the cabin
covers.
Preference to be able to start with mono-phase
electric motors for the types with power up to
4kW
It
is air cooled: Cooling is ensured by the air flow generated by the
flywheel fan through intercoolers and
after-coolers
Operation control (idle -loaded operation) is
provided by the pressure switch.
Monitoring the pressure condition in the system
is maintained with a manometer
The
system is provided with safeguards against excessive pressure with
a safety valve set to *1 bar value of the compressor operating
pressure.
Air
filter element is introduced into a plastic filter cup allowing
easy replacement.
Easy pass of the compressor to loading position
is ensured with 2 / 2Y discharge solenoid valve mounted on the
collector.
Compressor operating hour is ensured by the clock
counter integrated into the control
system.
Space savings are achieved with the compressor
unit being mounted on galvanization coated air
tank.
The
air tanks are designed and produced in accordance with the
***9/**5/EC directive.
The
air outlet on air tanks must be fitted with a ball valve. However,
a mini ball valve is also used for the evacuation of condensation
water under the tanks
Hand hole is added on the air tank providing ease
of service.
High Pressure *0 Bar
Oil Free Compressors EYPS-Type Oil Free Piston Air Compressors
(***********0 bar) OIL
FREE, HIGH PRESSURE, HIGH-OUTPUT, MULTI-STAGE, SLIDING BEARING
WATER COOLED, V-TYPE PISTON AIR
COMPRESSOR.
AIRKOM has
realized a first in our country as a result of long R&D
activities; we are proud to have carried out the first production
of an oil free, high pressure, high output, multi-stage, water
cooled piston air compressor made *0% from local materials,
compliant with EU regulations and standards, generally used in the
production of PET bottles. This design is not only produced for PET
bottle production, but is also produced suited to all other sectors
working with oil free and continuous pressurized air. For example,
in accordance with the compressed air needs of a business in
production, lower bar, higher or lower output designs can be
carried out according to customer demands.
Product
Specifications
• Casting, molding and machining
processes of main parts are carried out within DÄ°RÄ°NLER GRUP. In
this way, about *0% portion of the compressor system is
manufactured under our supervision.
• Valves, piston rings and sealing
elements are exclusively designed for this compressor by HOERBIGER
Company which is a pioneer in the
industry.
• Each piece is designed using ANSYS
CAD program. Thus, the most appropriate materials and design are
determined with the execution of durability and thermal
calculations.
• It is V-Type with 3
stages.
• Body and stage cylinders are made
of AN GJL***0 cast iron materials and stress relief operations are
implemented and treated as sensitive.
• The crankshaft is integral and made
of EN GJS ****3 ductile iron cast. Stress relieving procedures are
made. After processing, operating surfaces of bearings and
connecting rod handle are grinded.
• Connecting rods are two-piece and
made of EN GJS ****3 ductile iron material, processed after the
surface tension relieving treatment. Operating surfaces of
connecting rod on the crankshaft are cavernously processed
according to the crankshaft diameter after being coated with
special alloy materials.
• All stage cylinders are controlled
by a hydrostatic pressure test prior to
mounting.
• Air pipes in the - output
line between stages are controlled by hydrostatic testing after
being x-rayed following the welding
process.
• The linear motion of 1st and
2nd stage
piston shafts is provided with the sliding bearing
piston.
• 1st and
2nd stage
pistons and sliding bearing piston are casted from special alloy
aluminum material and processed after stress relieving treatment is
finished.
• 1st,
2nd and
3rd stage
pistons are made of PTFE material which is exclusively designed for
ESKOM and long lasting.
• Suction and discharge valves at all
stages are exclusively designed and manufactured for
ESKOM.
• Both sides of the crankshaft are
supported with bearings.
• Compressor despite producing
oil-free air is lubricated automatically by an oil pump driven by
the crankshaft for the purpose of lubricating certain mechanical
parts.
• Oil scraper packages and pressure
seal packages at 1st and
2nd stages
are available to prevent oil penetration into the air through
piston shafts.
• Compressed air stepping out of the
stage cylinder firstly passes through the water-cooled heat
exchanger and goes to the other stage after being cooled. There is
a safety valve crimped in the water
separator.
• After complete installation of
compressor block, its connections together with other components
are made on robust NPI profile chassis. Moreover, 6 vibration
isolating bellows are placed under the
chassis.
• The compressor and motor
connections are provided with V-belts. There is an easily
adjustable tensioning system.
• Compressed air emerging from
1st,
2nd and
3rd stage
cylinders is controlled by temperature and pressure
sensors.
• Stage cylinders are cooled with the
circulation of water from a closed system of water cooling
towers.
• **-bar air tank is manufactured in
compliance with CE standards and regulations and a hydrostatic
pressure test is applied after source X-ray is taken and
assessed.
• Closed loop water cooling
tower
• Circulation
pump,
• Air dryer and
filters
• Operating status of the compressor,
pressure and temperature values, outlet pressure and temperature
values of the stages, water temperature and flow values,
maintenance times, information showing that it is time to replace
spare parts, faults, PTC errors etc. can be followed through LCD
screen.
SKYPE : mfbalmustafa -
Mobile : + *0 **5 **0 *1 *5 ( Whatspp, viber
..)
بلد: |
Turkey |
نموذج رقم: |
LENTO 15A
|
سعر فوب: |
42000 ~ 46000 / Unit (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
germany |
سعر الحد الأدنى للطلب: |
42000 per Unit |
الحد الأدني للطلب: |
1 Unit |
تفاصيل التغليف: |
palet |
موعد التسليم: |
5 |
القدرة على التوريد: |
50 Unit per Month |
نوع الدفع: |
Western Union, D/P, D/A, L/C, T/T |
مجموعة المنتج : |
AIR COMPRESSORS
|