Aluminum Microchannel Heat Exchaner

الوصف

FUOOL MICROCHANNEL heat exchanger is with the following characters:

The reliability, corrosion resistance, low electrical power consumption, reduction of refrigerant charge,  low air side pressure drop, modular design, easy maintenance and cleaning, together with the compactness, and the lightweight, allow the reduction of overall costs with almost **0% recyclability.

FOR ALL REFRIGERANTS
The Fucool microchanne heat exchanger are the best choice for all standard refrigerants up to
a maximum pressure of *0 bar. In order to ensure the best reliability, regular burst tests
are carried out at more than **0 bar.

CORROSION RESISTANCE
For normal ambient and usage conditions, the fucool microchannel condenser alloys
are perfectly suited and the protective function of the oxide layer allows a very good
corrosion resistance in aggressive ambient conditions too. The use of aluminium is not
recommended only where chlorides occur in high concentration.

LIGHTNESS

Fucool microchannel heat exchanger are wholy aluminium made. That is why they are *0%
lighter than conventional fin-tube heat exchangers.

SIMPLE CLEANING
Regular cleaning is due but the Fucool microchannel heat exchanger high strength and the low coil depth

allow you to easily clean them with normal water pressure or with a high-pressure cleaner.

LOW REFRIGERANT VOLUME
In relation to their performance, the Fucool microchannel condenser require up to *5% less
refrigerant than conventional heat exchangers. Leak tests are carried out in relation to the volume of refrigerant in the system, so a lower volume can mean fewer leak tests.