سعر فوب
أحصل على آخر سعر1200 / Metric Ton
|5 Metric Ton Minimum Order
بلد:
China
نموذج رقم:
Anionic Polyacrylamide
سعر فوب:
1200 / Metric Ton أحصل على آخر سعر
الموقع:
China
سعر الحد الأدنى للطلب:
1200 per Metric Ton
الحد الأدني للطلب:
5 Metric Ton
تفاصيل التغليف:
20kg/bag or 25kg/bag;kraft paper bag dampproof packaging
موعد التسليم:
within 10days after deposit or receiving L/C
القدرة على التوريد:
999 Metric Ton per Month
نوع الدفع:
T/T, L/C
مجموعة المنتج :
الشخص الذي يمكن الاتصال به Ms. Amanda
#67 zhonghua road, hezhe, Shandong
Anionic Emulsion Polyacrylamide
Polyacrylamide anionic
1.General
Watercare anionic emulsion flocculants polymer is a anionic polyacrylamide that is used as a flocculants in a wide variety of industrial waste water, municipal sewage and paper mill wastewater treatment applications.
2. Specifications
Physical Form |
Milky, white liquid |
Total Solids |
According to the buyer's request |
Ionic Nature |
cationic |
Charge Degrees |
Medium-high |
Density: |
(1.**1.1)g/ml |
PH Value (stock) |
**6 |
Freezing Point |
**8 °C |
Flash Point |
> *4 °C |
3. Applications
The emulsions polymer produced by Watercare has been successfully applied in liquid/solids separation systems, such as clarification, thickening, flotation and dewatering. The polymer is especially useful for the thickening and dewatering of biological sludge, such as waste activated, mixed primary/secondary, aerobic and anaerobically digested sludge etc.
4. Usage guidelines
n Shake as long as possible before using this product;
n The suggested dissolved concentration is **5 ‰ and the dissolved time is about *5 minutes;
n When conveying, avoiding use of the centrifugal pump, and we had better use low shear pumps like the screw pump, diaphragm pumps etc.;
n Dissolve the product in plastic, ceramic, and stainless steel tank, and the stirring speed should not be too big, no heating required.
n High quality water shall be used for dilution. Solution shall be aged for *0 minutes for maximum effectiveness.
5. Storage and handling
n Suggested in-plant storage life is six months in unopened containers;
n Totes, drums and pails should be mixed very well before first use and every few days thereafter;
n Bulk tanks are best mixed using a multi-blade agitator that reaches to within two feet of the bottom of the tank;
n Mixing bulk tanks by recirculation is also feasible in some circumstances;
n For best results, store between ****0 °F (****7 °C) and do not allow this product to freeze since there may be some loss of performance;
n Should freezing occur, allow the product to thaw thoroughly in a heated area, mix very well and filter through a **0 mesh screen before attempting to use.
n Rubber gloves, goggles and protective clothing are recommended for use while handling.
n keep the handling field clean,preventing slippery
6. Technical service and maintenance
Shanghai water treatment materials Co., LTD can provide comprehensive technical service in product selection, laboratory test, plant test etc.
7. Packing
Delivered in *5 kg plastic totes, **0KG
plastic drums, ***0KG IBCs, mixing fully before using .This product
is not the dangerous goods.
If you have any questions, feel free to contact
tracy!
بلد: | China |
نموذج رقم: | Anionic Polyacrylamide |
سعر فوب: | 1200 / Metric Ton أحصل على آخر سعر |
الموقع: | China |
سعر الحد الأدنى للطلب: | 1200 per Metric Ton |
الحد الأدني للطلب: | 5 Metric Ton |
تفاصيل التغليف: | 20kg/bag or 25kg/bag;kraft paper bag dampproof packaging |
موعد التسليم: | within 10days after deposit or receiving L/C |
القدرة على التوريد: | 999 Metric Ton per Month |
نوع الدفع: | T/T, L/C |
مجموعة المنتج : | water treatment |