Auto pulse battery desulfator battery regenerator

SPECIFICATION

Specification

 

Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and thendeliver power. This sulfating process graduallyimpairsbattery function and causes a capacity loss until the battery can no longer perform the desired task and so thebattery is deemed to have “failed”. However using an Auto Pulse Battery Desulfator can reverse the process bydissolving the sulfates, cleaning the plates and restoringthe electrolyte strength so improving a battery’s lifeand capacity for an extended period.The Auto Pulse Battery Desulfator/Rejuvenator/Recovery unit uses no externalpower and generates a high-frequency pulse to dissolve batteries“sulfates”.

FUNCTION

Function

The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfatesto dissolve back into the electrolyte and so restoringbatteryfunction and electrolyte strength regaining the batteriesability to receive charging currentand deliverdischarge current.

 

 

ADVANCED TECHNOLOGY

Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery.

This old technology creates a harsh inductor peak that can be damaging to the battery plates.

Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.

Old technology also requires a large inductor so necessitating a physically large desulfator device whereas usingour advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.
 

NEW CYCLIC PULSING FUNCTION

In a similar manner to a Pulse battery charger (charge – rest –charge –rest etc)

a cyclic desulfating pulse function(pulse – rest – pulse – rest etc)

optimizes a batteries recovery process.

This method of desulfation has been implemented in the newAuto Pulse Desulfator

 

AUTO PULSE DESULFATOR BENEFITS

 

Increases Battery Power

Extends Battery Life

Battery Charge Faster

Longer Discharge

Prevents Sulfate Build-up

Reduces Evaporation

 

COMPETITIVE ADVANTAGES

 

Fully Automatic voltage selection. *2V *4V *6V and *8V

New Cyclic pulse generation method for improved capacity recovery“Soft” Peak Pulsin

Auto cutoff function to prevent over discharge of battery

User Configurable override for manual voltage selection

 

USAGE METHOD

 

Just Red terminal connect to battery positive and black terminal to battery negative. And Auto Pulse Battery Desulfatorcan cutoff when battery’s voltage is low.

 

MANUAL VOLTAGE SELECTION

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the desired operating voltage. By pressing the voltage select .

The LED screen will first display the working voltage and if you want to then alter the working voltage setting just presses the key again and the unit will change to next value. After setting the desired voltage the display will switch off to conserve battery power.

 

CUTOFF VOLTAGE