Automatic Magnetic Door Gasket Trimming Machine

الوصف

Automatic Magnetic Door Gasket Trimming Machine

Automatic magnetic door gasket trimming machine is the main working unit for PVC door gasket, controlled by screen touching mode, and the parameters could be freely setup, which make the operation easily, the door gasket draught by traction engine are draught and drilling mold, and draught onto the accessorial engine of trimming machine, at thim moment, please control the inserting speed by manual switch of "manual/auto" on electronic control case, after having inserted the gasket into cut mold exactly, please switchover to auto switch, at the same time, the touching-mode screen should switchover to "auto. Run", the double angle trimming machine cut the two ends of gasket to *5 degree according to the set length value, the cut speed would be adjusted according to the draught speed, which is controlled by the "Frequency Change" , and tightness of gaskets are controlled by the photoelectricity switch on the back of the drilling machine, after having been cut, the gaskets are draught onto the material putting plate.