Automatic wear magnetic stripe line instructions
Production equipment
1.To wear magnetic stripe automatically
2.Development of the machine
3.Working the case of Taiwan
Production process
*5 ° PVC strips——The magnetic stripe import PVC strips
front end——Wear cylinder stroke switch under
pressure——Rapid penetration of PVC strip magnetic stripe
magnetic stripe cavity
Instructions
1. *5 ° angle to the cutting line of the PVC strips on
the working text table, Hand wear strip magnetic stripe
cavity into the machine front end protruding magnetic
stripe, Hand to promote forward slightly while travel
switch signals, Wear cylinder under pressure at the same
time, Documented motor action,Rapid penetration of *5 °
cutting angle of the magnetic stripe of a certain length
PVC strips of magnetic stripe cavity, Thus the end of one
cycle of operation.Sub-cycle.
2. Connect the pressure of the trip switch rod strip show
no lift motor in low-speed operation,When the the
Exhibition strips the magnetic stripe tension rod lift
motor fast running.
3. Pressure
Gas source filter valve at a total pressure of 0.4MPa
Pressure to wear high-pressure cylinder valve
shall not exceed 0.*5MPa
Touch screen instructions
1. Chinese language interface of the touch screen.
2. Set length (head length) can be set according to the
desired length.
