automatic winding machine 600C

الوصف

1. Winding machine nailed one three reliable, enhance space utilization, No problem mixing traditional aluminum jonits and reduce labor and material costs. 2. Mechanical transmission system using double servo motor, The main shaft and the reel servo positioning device. To ensure the quality and stability. Needle distance and the guide for the establishment of the excellent. Fast. High productivity. 3. The machine adopts the famous desigh of the circuit control programmable PLC, the nailed, winding length of the speed with text display setting, fault display directly. Expedient setting operation. 4. The machine can choose cleaning device can absorb the foil foil ash trail, another option that can detect short-circuit testing organization within the short sub-prime. 5. Structure of double of four electrolytic paper, high aluminum foil overlap. Volume electrolytic paper can be 1 to 3 laps. which is best option for Φ*-Φ*2 high pressure products. 6. Guide wire nail machine negative foil flat on the department is adding a layer of aluminum foil before(****6mm), capacitor in a dynamic work to improve the exchange of microwave anti-, To prevent breakdown caused by excessive short-circuit; Guide wire nail machine is just above the add a layer of flat if the ministry of aluminum fil. Capacitor can increase the impact of work in a dynamic surge current capability. 7. Optional way of glue or tape device to complete, also choose to dual-function, According to different product to choose the best way to complete. Applicable standard Foil length *****0mm Foil width ***4mm Electrolytic paper width ***6mm The number of nail needle **4 PCS Nail needle distance 1.5mm. 1.8mm, 2.3mm Roll pin diameter Φ2.0 Φ2.5 Φ3.0 Complete way glue or tape Mechanical speed(PCS/MIN) Φ6X*2L ****5 Φ***6L ****5 Φ*0X*0L ****5 Φ****6L ****5 Configuring Specification Features: 1, Negative Outsourcing, the negative pole at the bottom Role: To enhance the internal heat capacity of the capacitor 2, Lead site pad of paper Role: To prevent the capacitor leads in the work area overheating, resulting in the breakdown of electrolytic paper and caused short-circuit 3, Pre-punching device Effect: To reduce producing aluminum dust when formation of nails rivet, reduce product short-circuit probability. 4, Partial core wire detection and correction Role: Reducing the inductance and impedance for capacitor under high frequency. 5, Guided needle righting device Role: To prevent the guide pin skew nailed or deflection nailed when it's nail riveted. 6, Synchronous winding device for winding needles with different size. Role: To effectively ensure the element without phenomenon of non-core pulling