الوصف

Detailed Product Description
Bare type steel cement infilled raised floor is composed of panels, pedestals, an anti-vibration gasket and screws. The panel is placed on top of the pedestals with an anti-vibration gasket and then locked in place with the screws in the corner-lock holes.
Steel Cementitious Raised Floor Description:
The standard cement infilled computer floors are used in this system. Instead of the tiles being laminated with a black conductive vinyl trim that serves as the edging, these panels have four holes drilled into each corner, where screws will secure the panels to the pedestals.
Panel size: **0x**0mm and *4'' x *4''
Thickness: *3mm
 
 
Performance Selection Chart (Test in accordance with CISCA)
Bare Type Steel Cementitious Infilled Raised Floor (SCP-B)
Panel Type Concentrated Load Concentrated
Ultimate Load Uniform Load Impact Load Rolling Load
     *0 Passes ****0 Passes
 KN LB KN LB KN/M2 LB/ M2 N LB KN LB KN LB
SCP **0B 3.6 **0 *0.8 ***0 *0 ***0 **0 **4 2.7 **0 1.8 **0
SCP***0B 4.5 ***0 *3.5 ***0 *0 ***0 **0 **0 3.6 **0 2.7 **0
SCP***0B 5.6 ***0 *6.8 ***0 *0 ***0 **0 **0 4.5 ***0 3.6 **0
SCP***0B 6.7 ***0 *0.1 ***0 *0 ***0 **0 **5 5.6 ***0 4.5 ***0
SCP***0B 8.9 ***0 *6.7 ***0 *0 ****0 **0 **0 6.7 ***0 5.6 ***0
Understructure
Option1 Cross head pedestal & Border pedestal
Pedestal features three key pieces: an aluminum cross head, a solid steel rod, and a base plate. The cross head is fixed to a M*8 or a M*0 solid steel rod which is welded to the base plate, which is normally **0mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. For greater height you can use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness:1.2mm*2.5mm, Diameter *2mm**0mm) and provides greater load bearing capacity.
Finished Floor Height: *0mm - ***0mm. Each pedestal allows for approximately *5mm**5mm height adjustment.
Pedestal Coating: Galvanized or an Electrophoretic coating
PERFORMANCE SELECTION CHART
Bare Type Steel Cementitious Infilled Raised Floor (SCP-CL-PDT)
Item FFH(mm) Horizntal
Load
(N) Vertical Load
(*8KN) Pedestal head Screw Rod Pedestal
Tube Pedestal Base
CL-PDT
*0~**0 *0~**0
+/**5 **0 Did Not Collapse *0x*0mmCross
Aluminum M*8 Or M*0 / **0x**0mm
CL-PDT
**0~**0 **0~**0
+/**5 **0 Did Not Collapse *0x*0mmCross
Aluminum M*8 Or M*0 Dia. *2 or *5mm **0x**0mm
CL-PDT
**0~**0 **0~**0
+/**5 **0 Did Not Collapse *0x*0mmCross
Aluminum M*8 Or M*0 Dia. *2mm **0x**0mm
CL-PDT
**0~***0 **0~***0
+/**5 **0 Did Not Collapse *0x*0mmCross
Aluminum M*8 Or M*0 Dia. *8mm **0x**0mm
Border Pedestal Similar to the flat steel head pedestal. Mainly used in the corners and borders of the installation site.
 
Option2 Flat steel head pedestal with gasket
This raised floor pedestal features four key pieces: a black plastic head cap (ABS/PP), a flat steel square head (*5mm), a solid steel rod, and a base plate. The flat steel head is fixed to a M*8 solid steel rod and then attached to the base plate, which is normally **0mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. The black plastic head cap (ABS/PP) then neatly fits on the flat square steel head.
The other option is to use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness: 1 mm*2mm, Diameter *2mm**0mm)
Finished Floor Height: *0mm ****0mm. Each pedestal allow for approximately *5~*5mm height adjustment.
Pedestal Coating: Galvanized or Electrophoretic
PERFORMANCE SELECTION CHART
Bare Type Steel Cementitious Infilled Raised Floor (SCP-PG-PDT)
Item FFH(mm) HorizontalLoad(N) Vertical Load
(*8KN) Pedestal head Screw Rod Pedestal Tube Pedestal Base
PG-PDT
*0~**0 *0~**0
+/**5 **0 Did Not Collapse *5x*5mm Flat Steel M*8 Or M*0 / **0x**0mm
PG-PDT
**0~**0 **0~**0
+/**5 **0 Did Not Collapse *5x*5mm Flat Steel M*8 Or
M*0 Dia. *2 or *5mm **0x**0mm
PG-PDT
**0~**0 **0~**0
+/**5 **0 Did Not Collapse *5x*5mm Flat Steel M*8 Or M*0 Dia. *2mm **0x**0mm
PG-PDT
**0~***0 **0~***0
+/**5 **0 Did Not Collapse *5x*5mm Flat Steel M*8 Or M*0 Dia. *8mm **0x**0mm
 
Option3 Bolted stringer system