Best quality Aluminum Chloride Hexahydrate and Anhydrous

الوصف

Specifications of Aluminum Chloride Hexahydrate or Aluminum Chloride Hexahydrate Commercial Pure

Aluminum Chloride Hexahydrate Grade 1

AlCl3·6H2O **1.*3

Aluminum chloride, hexahydrate.

Aluminum chloride hexahydrate [********6].

Assay: *8% minimum AlCl3 on dry basis.

Water: between *2.0% and *8.0%.

Sulfate— The addition of 0.2 mL of barium chloride TS to *0 mL of a solution (1 in **0) produces no turbidity within 1 minute.

Limit of alkalies and alkaline earths— To a boiling solution of 1.0 g in **0 mL of water add a few drops of methyl red TS, then add 6 N ammonium hydroxide until the color of the solution just changes to a distinct yellow. Add hot water to restore the volume to **0 mL, and filter while hot.

Evaporate *5 mL of the filtrate to dryness, and ignite to constant weight: the weight of the residue does not exceed 2.5 mg (0.5%).

Heavy metals, Method —  the limit is 0.**2%.

Iron — 0.**1%.

Aluminum Chloride Hexahydrate Grade 2

AlCl3·6H2O **1.*3

Aluminum chloride, hexahydrate.

Aluminum chloride hexahydrate [********6].

Assay: *5.5% minimum on dry basis

Fe: 0.**5% max

Water insoluble: 0.1% max

Pb: 0.***5% max

Packing: *5kgs net new plastic woven bag1x*0'FCL=*0mts with pallet..

Aluminium Chloride Hexahydrate BP Grade Ph Eur

AlCl3,6H2O *- **1.4 *- ********6

DEFINITION

Content: *5.0 per cent to **1.0 per cent.

CHARACTERS

Appearance: White or slightly yellow, crystalline powder or colourless crystals, deliquescent.

Solubility: Very soluble in water, freely soluble in ethanol (*6 per cent), soluble in glycerol.

IDENTIFICATION

A. Dilute 0.1 ml of solution S2 (see Tests) to 2 ml with water. The solution gives reaction of chlorides.

B. Dilute 0.3 ml of solution S2 to 2 ml with water. The solution gives the reaction of aluminium.

TESTS

Solution S1: Dissolve *0.0 g in distilled water and dilute to **0 ml with the same solvent.

Solution S2: Dilute *0 ml of solution S1 to **0 ml with water.

Appearance of solution: Solution S2 is clear and not more intensely coloured than reference solution.

Sulphates: Maximum **0 ppm, determined on solution S1.

Iron: Maximum *0 ppm, determined on solution S1.

Alkali and alkaline-earth metals: Maximum 0.5 per cent.

Heavy metals: Maximum *0 ppm.

Water: *2.0 per cent to *8.0 per cent, determined on *0.0 mg.

ASSAY

Dissolve 0.**0 g in *5.0 ml of water. Carry out the complexometric titration of aluminium. Titrate with 0.1 M zinc sulphate until the colour of the indicator changes from greyishgreen to pink. Carry out a blank titration. 1 ml of 0.1 M sodium edetate is equivalent to *4.*4 mg of AlCl3,6H2O.

Aluminum Chloride USP Grade

AlCl3·6H2O *- **1.*3 *- [********6].

Aluminum Chloride contains not less than *5.0 percent and not more than **2.0 percent of AlCl3, calculated on the anhydrous basis.

Identification: A solution (1 in *0) responds to the tests for Aluminum and for Chloride.

Water: Between *2.0% and *8.0%. 

Sulfate: The addition of 0.2 mL of barium chloride to *0 mL of a solution (1 in **0) produces no turbidity within 1 minute.

Limit of alkalies and alkaline earths: the limit is 0.5%.

Heavy metals: the limit is 0.**2%.

Iron: the limit is 0.**1%.

Aluminium Chloride Anhydrous or Anhydrous Aluminum Chloride

Specifications of Anhydrous Aluminum Chloride or Aluminum Chloride Anhydrous Commercial

Anhydrous Aluminium Chloride or Aluminum Chloride Anhydrous is available in two forms viz. Powder and Crystals:

Packing: In *5 HDPE bags with liners or *0 kg MS or HDPE drums with liners.