Main saw motor

Short circuited motor, Depending on the blade diameter.

Peripheral speed V

(Can be changed on order)

Ca. *5m/sec

Sawing reach

3x2 m

Saw Table

-Saw table rotating through roller bearing

-Base welded and powder coated

-Fixation points on ***********0 and a manual brake to fixate in every position.

-Table rotates manual  

-Top surface equipt with wooden strips

3x1.5 m

Program

The following values can be set per block:

Ø The starting point for the first cut 

Ø The place where the width of the block ends, means an adjustable stop  

Ø The offset for the blade thickness  

Ø The number of slabs and the thickness. 

Ø There are 5 different slab sizes that can be put in the program. The number of repeat is unlimited

Central lubrication

Automatic lubricating pump which lubricate the essential parts

Castrol Olit CLS grease

Electrification

Suited for **0 V – *0Hz, 3 phase with 0 And earth

The machine is wired completely and is equipped with a stationary control cabinet, PLC control, The motors applied are fully closed and at least comply with form of protectionIP*5 and insulation class F