سعر فوب
أحصل على آخر سعر|
1 Minimum Order
بلد:
China
نموذج رقم:
BS-009
سعر فوب:
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
1
تفاصيل التغليف:
plywood case
موعد التسليم:
depending
القدرة على التوريد:
10 per Week
نوع الدفع:
-
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Ms. wang
hanguang, xian, SHAANXI
1 . Introduce :
BS***9 wire stripper have 9 inlets, it is apply to single core wires,multicore cables, fit for 1mm**0mm wire stripping , This machine has the following specifications:
* Low power requirement.
* Small dimensions
* Easy to move, place and install.
* Easy and rapid maintenance.
2 . technical data:
BS***9 Scrap
Copper Wire Stripping Machine Auto Waste Cable Wire Recycling
Machine lowest price Electrical Wire Stripper
machine.
1. Equipped with PLC control system Electric box Suitable structure and layout, easy to install.
2. Reliable operation, low noise and large capacity
3. Double crushing process improves the copper recycling purity
4. Recycling *9.*9% copper from scrap copper wires or cables
5.Has a high recycling rate of *9.*9%, When processing the scrap/waste copper wire/cables, it has no dust, no environmental pollution
5. Independent conveyor to delivery mixture of copper and plastic, making the whole working plant more stable
6. The blade of the crusher can be removed to be sharpen
7. When processing the waste copper wires, there is no dust, no environmental pollution
8. No need water during the whole process
9. Voltage can be changed according to your needs.
3. Instructions of Production
| Step 1: Push the Switch up to turn the Motor ON,Check whether the machine work well.Make sure There are no people on the output side of the machine.Comparing the cables/wiresdiameters with the feeding holes on the machine,feeding the cables/wires one piece at one time.Before feeding the cables/wires,please cut off the head of the cables/wires,to avoid gaps caused to the blades. |
|
Step 2: On the output side,if the cuts on the cables/wires are too deep,please check below points:Please adjust the handles on the side, screw down or loose them. (M*2 handles)Check whether the cables/wires on the right position as you feeding them.Make sure the blades are sharp,if not,polish them with the oil stone |
|
Step 3: On the output side,if see the plastic(PVC)has been stripped,but the copper wires can not been disgorged,please check below 4 points:polish The axis of the upside with the oil stone;Check whether the springs are loose,if yes, screw down to make them tighten;The diameter of the cables/wires are too small,please adjust the space between the two axises to 0.**0.6mm. If the cables/wires you want to strip are hot,also can not get the copper wires stripped out. |
|
Step 4: If the cables/wires were Blocked in the axises,please check below points: check if the V-belts are loose. If the springs on the press wheels are too tight,loose them. There are too much oil on the cables/wires,please wipe it(make sure the machine is turned off when you wipe the axises) |
|
Step 5:If see the blades tilted : Check whether the center adjuster was loosed. centering adjustment and adjust the screws of two sides of it. |
3 . function:
frame dual blades principal, can process different diameter cable,
easy to operate and durable.
Safety Requirements
Make sure the cables/wiresdiameter are similar with the feeding holes ,large cables/wires in large feeding holes, small cables/wires in small feeding holes, flat cables/wires in flat feeding holes.
Make sure the axis turn to the right side, never put hand into the
safety guards when the machine is running. Keep child far away from
the machine.
FAQ
| بلد: | China |
| نموذج رقم: | BS-009 |
| سعر فوب: | أحصل على آخر سعر |
| الموقع: | - |
| سعر الحد الأدنى للطلب: | - |
| الحد الأدني للطلب: | 1 |
| تفاصيل التغليف: | plywood case |
| موعد التسليم: | depending |
| القدرة على التوريد: | 10 per Week |
| نوع الدفع: | - |
| مجموعة المنتج : | - |
