C purlin machine, C steel section machine, C shaped purlin machine

الوصف

C purlin machine INTRODUCTION C-shaped purline machine can produce many types of C-shaped purline. The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, punching equipment, pre-cutting equipment, C-shape forming system, hydraulic and controlling system. MAIN TECHNICAL SPECIFICATION Size: ***0mm * ***0mm * ***0mm Total weight: About ****0KG Controlling system: PLC Main motor power: *5KW Hydraulic station power: *5KW Workingspeed:****0mm/min Hydraulic pressure: *8~*0mpa Product range: All the types from *0 to **0 PRODUCT FEATURE AND USAGE The base plate of machine is processed by planing and wallboard is fixed by located pins. Keeping the plate in the orbit and rolling with high accuracy. Computer measure the length. Hydraulic punching the both ends hole for connection at the same time puching the middle lacing hole. Plc adjust the longitudinal dimension of the pitch-row; the lateral dimension is adjusted by the leadscrew. Hydraulic dislocation cutter to make the geometry section accurately and avoid waste. All the rollers are forged from the high quality structural steel and areprocessed intensely. The surfaces of the rollers are plated with hard chromium, which lengthens the operating life of rollers. The computer controls the length, punching and counting. There are the flattening rollers at the front end of the machine, which are used for flattening the strip steel with poor flatness. After flattening, theproduct is smoothing and flattening and conforms to the standard, whichincreases the economic benefit. The C-shaped purlines formed by this machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, garden and so on.