Cage Equipment for Pullets and Broilers Growing

الوصف

TE XHA’s Cage Equipment for Pullets and Broilers Growing Provides:

1. Optimal conditions for poultry growing
The single regulation lath used in the equipment enables controlling of access to feed depending on chicken’s age. The lath
has mechanized drive
The padding is done from sheet galvanized steel
Meshy partition in the cage contributes into favorable climate in the poultry house and reduces the speed of air circulation
The height of nipple drinking bowls is regulated depending on the birds age
The cage is tightly closed with simple and reliable lock
Each cage has three nipple drinking bowls: two of them have doubled mobility of valves, heightened throughput and are equipped
with drop-catchers; one of them has a microcup. It helps chicken to find the water during the first hours of cage housing
The minimal using of plastic elements contributes into hygienic conditions and enables washing with hot water under the pressure
The cell of floor mesh has optimal size

2. Exploitation period
TEXHA’s cage equipment is made of high-quality steel covered with 1 class zinc
The necessary firmness reserve has been provided in the structure
The steel file-hard sprockets and motor-reducers, which do not need the maintenance, are used in the drives
The galvanized fastening items have retaining washers
Usage of new system of floor mesh supports, what prevents the mesh sagging and bending after a long exploitation time
Usage of n-shaped uprights in the partitions of cage part of equipment increases firmness of the structure

3. Low exploitation expenses
The energy-saving technologies are used in TEXHA’s Cage Equipment for Pullets and Broilers Growing. The electrical devices
power is 2.1 KW in each battery
TEXHA provides all equipment with spares

Feeding System
The prime cost of egg production includes the cost of the feed. Economical results depend on the preciseness and effectiveness of
the feeding system. TEXHA provides their Cage Equipment for Pullets and Broilers Growing with feeding system, which has hopper
feed distribution.
The hopper feed distribution system of TE XHA’s equipment
meets the modern poultry farming requirements:
- The extensional dosing system provides high
accuracy of feed distribution according to the modern
standards
- The galvanized 1 mm thick feeding tray significantly
contributes into hardness of the battery
- The bent inwards feeder’s side prevents feed loss
- The dosing machines enable even feed distribution
through all tiers or some of them
- The feeding tray construction prevents appearing of
stagnant zones
- The feed is not fractionated by size
The hopper feed distribution system of TE XHA’s equipment
includes:
- Silo
- Steel spiral transporter for diametrical feed loading
into the hopper. It has automatic turn off system with
contactless capacitive sensor
- Two compound hoppers for each battery. Each of them
consists of separate galvanized hoppers, one per each
tier of the battery
- Dosing machine or brushes for feed evening and
blending through the feeding tray

Drinking System
Drinking system is one of the most important systems in life support of birds. TEXHA provides their Cage Equipment for Pullets and
Broilers Growing with simple, reliable, and effective drinking system.
Drinking System Components:
- Water treatment unit, which includes water meter, medicator, filter for mechanical water cleaning, manometers, stop valves
- Water distribution system which enables pressure controlling in the drinking system lines. The system is equipped with
tanks with float valves and pressure controllers if needed
- Drinking lines. Each cage has 3 nipple drinking bowls: two of them have drop-catcher and doubled mobility of valve; one of
them has microcups. The drinking line may be regulated depending on birds’ height
The nipple drinking bowls are installed in the pipe *2x*2 mm by means of special equipment, what provides the high-qualitative
installation and prevents water leak in the joining areas. Using of couplings and yokes and avoiding of glue contributes into high
water quality.
The drinking bowls are located inside the cage, so the birds have the free access to water all over the place.
Drinking System Advantages
- Exact dosing of expensive medications
- The water meter enables controlling of water consumption
- Location of manometers allows visually control the filters condition

Manure Evacuation System
The manure evacuation system in TEXHA’s cage equipment enables fast and qualitative manure removing. The system’s drive is
powerful, simple, reliable, and durable.
The longitudinal manure evacuation belts are cleaned by scrapers made from wear-resistant material. It enables fast and qualitative
manure evacuation onto diametrical transporter. Manure removal is done by electric motor from all tiers simultaneously. Manure is
removed by the inclined transporter and loaded on vehicle. The inclined transporter may be covered with galvanized shield, if it is
cold climate zone.
The air humidity while manure evacuation is up to *5 %. Timely manure evacuation and right manure consistence don’t let the
excessive ammonia and water evaporation. It contributes into favorable climate in the poultry house.
Manure Evacuation System Components:
- Polypropylene Manure Evacuation Belt
- Driving Station, which drives and controls belt position (one driving station per each battery)
- Adjuster Station, which stretches the belt (one adjuster station per each battery). The adjuster station construction includes
screw-shaped adjuster shaft, which cleans the belt from the inside
- The diametrical transporter with fabric and rubber belt for evacuation of manure from poultry house
- The inclined transporter with fabric and rubber belt for manure loading onto vehicle
Advantages of Manure Evacuation System in TE XHA’s equipment
- It is possible to turn on the system for each tier separately. It saves energy resources
- It is possible to do the hot washing under the pressure