الوصف

Caved Fluorocarbon Spring Aluminum veneer Interior/exterior decoration adopts ***0,***3,***5 aluminum alloy plate as base material. The surface coating is divided into fluorocarbon spraying, powder spraying, polyester paint spraying, fluorocarbon pre-roll coating. fluorocarbon sprayed surface coating according to the processing technology is divided into two coating one baking, three coating one baking and three coating two baking, powder sprayed surface coating for one coating one baking, the color can be provided by the company standard color card for customers to choose.

 Conventional thickness:1.5mm,2.0mm,2.5mm,3.0mm.
 Commonly used specifications:**0***0mm,**0****0mm 

aluminum veneer installation method
 1, according to the same horizontal height to load the edge corner. 
2, according to different requirements have different skeleton, angle steel fixed, embedded aluminum pendant fixed, etc., according to different products have different fixing methods. 
3, pre-installed on the fastener keel, together with the fastener keel attached to the light steel keel into a vertical direction buckle under the light steel keel, buckle plate keel spacing according to the size of the plate to determine, after all must be adjusted to the level.
 4, the aluminum plate in the order of the keel, each piece of buckle, will be pressed down the reverse lock, the keel connection with the connector connection. 
5. Gloves must be worn during plate mounting. If finger marks or stains are left carelessly, they can be washed and dried with detergent.