سعر فوب
أحصل على آخر سعر999 ~ 6999 USD /
|1 Set Minimum Order
بلد:
China
نموذج رقم:
-
سعر فوب:
999 ~ 6999 USD / أحصل على آخر سعر
الموقع:
-
سعر الحد الأدنى للطلب:
999
الحد الأدني للطلب:
1 Set
تفاصيل التغليف:
-
موعد التسليم:
-
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
الشخص الذي يمكن الاتصال به Mr. Michael
Hongtai Building, No.29 Xixian Road, Dalian, Liaoning
Overview
The 2BE3 liquid ring vacuum pumps and compressors are high-efficient and energy-saving products developed by our company on the basis of our scientific achievements and production experiences over the years and internationally advanced technique of similar products. They have low vacuum and high extraction capacity and are usually applied to exhausting water insoluble, noncorrosive and solid particle-free gases for creating vacuum and pressure in closed containers. They are also applicable for corrosive gases, or corrosive liquid can be used as treatment fluid by modifying materials of parts. The products are being widely used in fields of paper making, chemistry, pharmacy, coal dressing, mineral separation, petrochemistry, light industry, food, metallurgy, building material, stoneware and chemical fertilizer due to their outstanding and reliable performances and durability.
The main characteristics of 2BE3 series products:
· The tolerance, corrosive status, and the begrime
situation can be easily observed by the big inspection
port on both sides of the end-shield.
· The 2BE3 series pumps have flanges both on the top and
sides with the same diameter. It is more convenient to
connect with the 2BE3 series pumps.
· The bearings are all used of the imported products in
order to keep the precise orientation and the high
stability during the working of the pump.
· The material of the impeller is QT**0 nodular iron or
steel plates for ensuring the stability of the pump under
the various rigorous situations and extending the life of
the pump effectively.
· The casing is made of steel or stainless steel plates
to extend the lifetime of the 2BE3 series pumps.
· The shaft bushing is made of stainless steel plates to
extend the life of the pumps 5 times more than the normal
material.
· The V-belt pulley (when the pump is driven by the belt)
is used of the high precise pulley with taper bushing to
keep the reliability of the pump and extend its life. And
it is also easy to mantle and dismantle.
· The unique design of setting the separator above the
pump saves the space and decreases the noise
efficiently.
· All the spare parts are cast by the resin sands that
make the surface of the pump very smooth. So it is not
necessary to cover the surface of the pump with putty and
gives out the heat efficiently.
· The mechanical seals (optional) are all used the
imported products so as to avoid the leakage during the
working of the pump for a long time.
Compared with 2BE1 series, 2BE3 series are
different in the following aspects:
They have higher suction capacity and lower
vacuum, thus they are suitable for operations
requiring large suction capacity such as mine gas
discharge and pressure swing adsorption for
chemical plants.
Cylindrical ball bearings are replaced by
double-row tapered roller bearings, thus service
lives of the bearings are prolonged and load
carrying capacities are improved.
Theconcave-convex connectorfor locating the pump
and distribution plate is replaced bytwo pins on
one surface. The stop pins ensure the radial
clearance between the impeller and
pump.
Air inlets and vents are arranged on both top and
side end of the pump cover. In case that the gas
shall be filled or discharged from the top, the
side air inlets and vents are sealed by blank
caps, thus there are more assembly options.
High voltage motor may be available for the 2BE3
series since their energy consumptions and powers
are increased due to large volumes and large
suction capacities. The transmission is usually
carried out by reducers. Pumps *0/*2 may use belt
transmission while pump *0 and superior ones
shall adopt reducers for transmission.
2BE3 series have additional eccentric clapboards
for dividing the pumps into two chambers with
impeller middle plates. Air inlets and vents on
side flanges make one pump adequate for
operations requiring two pressure points, such as
paper making.
Table of performance of 2BE3 liquid ring vacuum pumps
| Type |
Speed (Drive type) r/min |
Max shaft power kW |
Motor Power kW |
Suction Capacity |
Limited vacuum (abs) mbar |
Weight of bare pump with separator kg |
|
| m 3 /h | m 3 /min | ||||||
| 2BE3 **0 |
**0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) |
*2 *5 **5 **4 **8 **7 **9 |
**0 **0 **2 **0 **5 **0 **0 |
***0 ***0 ***0 ***0 ***0 ***0 ***0 |
*0.8 *4.2 **4.2 **5.0 **4.5 **3.3 **3.3 |
**0 | ***5 |
| 2BE3 **0 |
**0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) |
**8 **2 **7 **0 **4 **9 **0 |
**2 **0 **5 **0 **0 **0 **5 |
***0 ***0 ***0 ***0 ****0 ****0 ****0 |
**0.8 **7.5 **2.5 **6.6 **9.2 **8.3 **3.3 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**2 **1 **3 **8 **7 **8 |
**0 **0 **0 **0 **5 **0 |
***0 ****0 ****0 ****0 ****0 ****0 |
**5.0 **9.2 **0.0 **1.7 **0.0 **8.3 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**2 **0 **5 **8 **7 **2 |
**0 **0 **0 **5 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**8.3 **5.0 **3.3 **6.7 **0.0 **1.7 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**5 **3 **5 **2 **5 **5 |
**0 **0 **5 **5 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**1.7 **0.0 **6.7 **1.7 **6.7 **0.0 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**0 **0 **0 **0 **0 **0 |
**0 **5 **0 **0 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**0.0 **5.0 **5.0 **5.0 **6.7 **6.7 |
**0 | ****0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**0 **0 **5 **5 **3 **5 **0 |
**5 **0 **0 **0 **0 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 ****0 |
**5 **0 **6 **5 **0 **2 **6 |
**0 | ****0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**5 **5 **5 **0 **2 **5 |
**0 **0 **0 **0 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**5 **5 **8 **9 **3 **5 |
**0 | ****0 |
For more information,please feel free to contact with ZS Equipment.
| بلد: | China |
| نموذج رقم: | - |
| سعر فوب: | 999 ~ 6999 / أحصل على آخر سعر |
| الموقع: | - |
| سعر الحد الأدنى للطلب: | 999 |
| الحد الأدني للطلب: | 1 Set |
| تفاصيل التغليف: | - |
| موعد التسليم: | - |
| القدرة على التوريد: | - |
| نوع الدفع: | - |
| مجموعة المنتج : | pumps |
