الوصف
NIC-PT Colored Cement is a pre-colored blend of Portland cement,
fine aggregate, polymer additive and Hydrated Lime with Metallic
Oxide Pigments. It is used mainly as a colored finishing coat or
decoration on every kind on wall, and can be applied manually and
with the use of a spray gun. Moreover, depending on the method of
application, different decorative result can be achieved. The
colors and decorative results are provided to enhance the
architectural and aesthetic appearance of building by matching,
contrasting, or complimenting the building units. SURFACE
PREPARATION Surfaces should be free from dust, dirt, oil etc.,
should be smooth and stable, and should not be too dry or wet. The
substrate shall have certain surface strength, common evenness and
verticality. For hand applications the substrate should be dampened
with clean potable water to control suction. Major cracks, holes,
or voids should be repaired prior to application. MIX *5 kg of
NIC-PT Colored Cement mixed with 8.3 lt. (*3%) of water for hand
application. *5 kg of NIC-PT Colored Cement is mixed with *2.5 lt.
(*0%) of water for spray application. It is recommended to use low
cycled (**0 r/min) electrical mixer in order to make the mortar
homogeneous. The mortar should be in a consistence and shape of
water drop which will not flow when handled with a steel trowel.
The possibility of staining mortar should rest for 3 minutes prior
to application and should be applied after remixing. APPLICATION
Apply NIC-PT Colored Cement should be applied to an approximate
thickness of 1/8" (3mm). For hand application: Apply NIC-PT Colored
Cement by trowel evenly to the substrate with enough pressure to
insure tight contact. Immediately double back with a second coat
prior to floating or texturing. For spray application: Two coats
are necessary. Apply the first coat over a dry surface to produce
complete color coverage. When first coat has thoroughly dried
(usually **4 hours), apply a second coat for texture depth and
color uniformity. l It is recommended to use protection agent once
or twice on the surface in order to prevent fadedness, slurry-out,
and pollution after the texture finish in 1~2 days. PRECAUTIONS Do
not apply if ambient temperature will fall below *0° F (4° C)
within *4 hours. During periods of hot/dry weather moist curing may
be necessary. Variations such as thickness and composition of
substrate, surface textures, inclement weather, mixing and
application technique, or addition of field additives may impair
color uniformity. NIC-PT Color Powder Paint should not be exposed
to water or rainwater for *4 hours after application. COVERAGE One
*5kg bag covers approximately *0 to *6 ***** with machine
application One *5kg bag covers approximately 6 to 9 ***** with
hand application. PACKAGE *5 kg/bags, packed in Paper, PVC, Plastic
three layers craft bag STORAGE Shelf life is minimum 1 year when
stored in covered and dry environment.
بلد: |
China |
نموذج رقم: |
NIC-PT
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
Guangzhou , China |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
1 Tone |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
5000Ton/Month |
نوع الدفع: |
- |
مجموعة المنتج : |
- |