Composite Wastewater pH Electrode

الوصف

In PH measurement, the used electrode is also known as the primary battery. The primary battery is a system, whose role is to transfer chemical energy into electrical energy. The voltage of the battery is called the electromotive force (EMF). This electromotive force (EMF) is composed of two half-batteries. One half-battery is called the measuring electrode, and its potential is related to the specific ion activity; the other half-battery is the reference battery, often called the reference electrode, which is generally interlinked with the measurement solution, and connected to the measuring instrument.
   
 

Model No.: PH8012
Measuring range: 0-14pH
Temperature range:0-85ºC
Compressive strength:0.6MPa
Slope: ≥96%
Material: PPS/PC
Zero point potential: E0=7PH±0.3
Internal impedance: MΩ(25ºC) ≤250 MΩ
Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding)
Installation size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.
                
Features of PH Electrode: 
1.It adopts the world-class solid dielectric and a large area of PCE liquid for junction,
difficult to block and easy maintenance
2.Long-distance reference diffusion channel greatly extends the service life of
electrodes in the harsh environment
3. A new design of glass bulb increases the bulb area, prevent bubble formation
interference within the buffer, makes the measurement more reliable.
4.It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy
for installation and there is no need of the jacket, thus saving the installation cost.
5.The electrode adopts the high-quality low-noise cable, which makes the signal output
length less than 20 meters free of interference.
6.There is no need for additional dielectric and there is a little amount of maintenance.
7.High measurement accuracy, fast echoing and good repeatability.
8.Reference electrode with silver ions Ag/AgCL
9.Proper operation shall make service life longer.
10.It can be installed in the reaction tank or pipe laterally or vertically.
11.The electrode can be replaced by a similar electrode made by any other country.