Submerged implant kit is a comprehensive set of implants which are
necessary for dental implant surgical procedure.
Our submerged implant kit consists of basic drill, final drill,
reamer and prosthetic. Basic drill included in submerged implant
kit determines initial entry point on the cortical bone. Final
drill has an excellent drilling capability provided by optimal
design of the tips. Reamer creates spaces for upper part of
fixtures for easy implantation, and prosthetic is used when
implanting fixtures. There are many models of implant devices.
Check our website for our submerged implant kit.
The CSM Submerged Implant System includes various one-stage
xtures and two-stage xtures made of titanium. These implants are
inserted into the upper and/or lower jawbone and served as a
tooth root replacement providing a stable foundation for
restorations.
CSM Implant System Instructions for Use
Precautions
Surgical technique for endosseous dental xture implant requires
special and complex procedures. Formal training for xture
placement is recommended. Important : Determine local anatomy
and suitability of the available bone for xture placement.
Thorough screening of prospective xture must be performed.
Panoramic and periapical radiograph for visual inspection are
essential to determine anatomical landmarks, occlusal
condition, periodontal status and adequacy of bone. Lateral
cephalometric radiographs, computerized axial tomograghy and
tomogram could be instructive. Appropriate radiography, direct
palpation and visual inspection of the xture site are necessary
for planning or treatment prior to use xtures.
Directions for use
The surgical procedure should be done under aseptic condition
with specially designed sterile surgical instruments. The
sterilized implants have to be delivered precisely from package
to preparation site. An electrical surgical drilling system
with internal or external irrigation is recommended. Prescribed
drilling sequences (Guide drill Pre-nal drill - Final drill) or
combination of surgical tools with 70Ncm torque power should be
followed to make a hole in the jawbone and to place a xture. In
case of Hard Bone(D1) please use CSM D1 Drill or the drill of
next diameter. Parallel Pin is used for measuring the direction
and the depth of the hole. Fixture in the ampul should be
placed up by using Mountless Driver and be planted into the
bone. Handpiece or Ratchet Wrench is usable to plant. Insertion
depth of CSM xture shall be 0.2mm below than the bone level.
When the xture is fully seated, carefully remove Mountless
Driver and place Cover Screw or Healing Abutment on the xture.
Then close tissue ap and suture it. The healing period will be
45~90days for lower jaw, 90~180days for upper jaw. (Don't lost
balance in drilling work during operation)
Usage and Storage
• This product is disposable.
• It should not be reused.
• All the product package should be stored at low humidity and
room temperature condition
Caution
• Surgical Complications : Implant procedure has risks such as
localized swelling, dehiscence, temporary pain, edema, hematoma
or bleeding. Numbness of the lower lip and jaw after mandible
surgery and tissue beside the nose after maxilla surgery is a
possible side-eect. It is a temporary nature, though the
numbness lasts permanently very rarely. Gingival-mucosal (gum
tissue) ulceration, tissue reaction, or infection may occur but
it generally responds to local care.
• After the procedure of implant treatment could be found
swollenness of a specic part, rupture, temporary palpate
sensitiveness, an edema, hematoma, bleeding.
• Insensibility of lower jaw and lip, some side eects relating
around the nose from maxillary sinus treatment may occur that
is mostly temporary but rarely permanent paralysis could
appear.
• Contraindications : Fixture should not be placed in case
where the remaining jaw bone is too diminished to provide
adequate width and height to surround the implant. Lack of
osseointegration or subsequent implant failure may occur in
cases insucient bone available, poor bone quality, poor oral
hygiene, heavy smoking, or under medical conditions such as
blood disorders, infected HIV virus or uncontrolled
diabetes.
• Warnings (Wornings for possible side eects from the usage of
medical devices) : As xture surgery and dental restoration
involve complex surgical procedures, for safe and eective use
of xtures, specialized training is strongly suggested. Improper
patient selection and technique can cause the xture failure
and/or loss of supporting bone. Wobble of xture, bone loss, or
chronic infection may cause xture failure. If the xture becomes
contaminated by the patients body uids in any way, the xture
cannot be used in other patient. Do not splint or bridge with
natural tooth. Excessive force on the xture will cause metal
fatigue and can cause xture fracture. Single stand or by xtures
are recommended.
• Interaction : Dental xtures are designed only for its use and
must not be altered and converted in any way. The use of
electro-surgical or laser surgical instruments around metallic
xtures and their abutments is not recommended due to the risk
of electric shock and/or heat burn.
• Usage for the aged or a pregnant woman : The aged, a pregnant
woman, growth phase, an obese patient or a patient who had
other case history shall be considered to perform an
operation.
• Warnings for application : A surgeon shall be followed
instruction of the procedure for high success rate of implant
surgery. Advert to not damage on nerves, diagnose concavity on
lingual side of the submaxillary bone for preventing
perforation of the submaxillary bone. Do not put over torque
for preventing bone crack. • Caution of safety accidents : Take
any possible stus away as combustibility materials or
unsterilization devices from a patient and a surgeon.
