CTL-torque limiter

سعر فوب

أحصل على آخر سعر

10 Minimum Order

بلد:

China

نموذج رقم:

CTL-torque limiter

سعر فوب:

(قابل للتفاوض) أحصل على آخر سعر

الموقع:

SHAN

سعر الحد الأدنى للطلب:

الحد الأدني للطلب:

تفاصيل التغليف:

WOOD

موعد التسليم:

15DAYS

القدرة على التوريد:

100

نوع الدفع:

T/T

مجموعة المنتج :

الاتصال الآن

shanghai Pecang Transmission machinery manufacturing co., ltd

China

عضو مجاني

الشخص الذي يمكن الاتصال به Mr. andy

minfa, shanghai, Shanghai

الاتصال الآن

مواصفات المنتج

Structure: Double
Material: stainless steel
Brand Name: PECANG

الوصف

Friction-type structure, It is sliding friction between active side and middle of connecting plate when overload, so that can prevent the high losses for the equipment. Maximum overload torque is up to **0KN.m.

Universal joint: a mechanical device to shaft axis or change the fixed intersection angle, torque and / or rotary movement transmitted from one shaft to another root axis.

High-load universal joints: combine with large hole and small hole in the yokes composition, pin and support fast-axis structure. Parts material is a higher level, so "economic" in the universal joints are better choices.

High-strength joints: combine with large hole in yokes, gasket and support the Shaft block structure, which is better than traditional clasps performance. This riveting solid parts with axle pin structure than the more common high-load strength of joints is very suitable for high torque applications, while this design is also suitable for large-diameter shaft. Leveling high-strength joints: universal joint appearance since the structure of high-grade materials and processing characteristics of their ability to withstand more torque. In addition to the same basic functionality, the mechanical properties increased to extend the life of universal joints.
Needle bearing universal joints: The optimal design can be applied to many industries of mechanical connections. This needle bearing universal joint needle roller bearings lubricated by the seal and the cross-axis composition can have protective cover add. In the push-pull applications, this universal joint transmission of high axial rigidity and universal joints can be better than other high-speed processing power with great angle.
Double Universal Joints: with a single universal joint with the same reliability and service life of the case, the work angle can reach *0 °. Double universal joints provide precise positioning and can work in different and flexible operation of the next angle.
Pin and block universal joint support: support block pin and universal joint is the simplest way linking. This universal joint coupling with the flexibility is better than traditional absolute rotation and torque transmission edge. Cross shaft and bearing joints: Forged shaft and needle bearing cross connection provides a minimal backlash precision operation capacity, and will not affect the capacity of any torque.
Needle Roller Bearings joint: needle roller bearings are installed in the tip of pin shaft that can reduce the backlash, and improve accuracy and maximum speed.
Torque: Torque is the pressure caused rotation. Working torque is delivered when the value of torque. Torque is usually show with pound force inch (Ibf-in), (Ibf-ft), or Newton-meter that (Nm). T [lbf-in] = HP x ****4 T [Nm] = kW x ***5 RPM RPM Axial, parallel and angular misalignment: axial deviation between the two axes relative axial displacement, often caused by the vibration motor. Parallel to the drive shaft and driven shaft deviation is between the radial offset. Angular deviation of the angle is formed by the intersection axis deviations. Reverse rigid: rigid moment is that the degree of resistance to distortion. Usually show with pounds - inch / radian (lb in / rad) or N - m / radian (Nm / rad). 6.****7 pounds force inches / radian (lbf-in/rad) = 1 Nm / radian (Nm / rad). 0.****5 pounds force inches / angle (lbf-in/Grad) = 1 Pound-force inch / point (lbf-in/rad).
Zero Backlash: zero backlash is that the link in the clearance of the value. Work cycle: applied to the universal joint on the load is either intermittent or continuous. In most of the operation, the intermittent continuous load capacity is greater than carrying capacity. Unit Conversion: 1 lbf-in = 0.****9 Nm 1 lbf-ft = 1.****2 Nm 1 Nm = 8.****5 lbf-in 1 Nm = 0.****6 lbf-ft 1 HP = 0.***7 kW 1 kW = 1.**1 HP Inch = *5.4 mm 1 mm = 0.***4 Inch 1 lbf = 0.***6 kg 1 kg = 2.***6 lbf Uniform velocity: In order to achieve the constant speed drive shaft and driven shaft operation, two axes are arranged in parallel to maintain. Yokes direction: When shaft is used to connect two single-axis gimbals to produce Double universal joint, the inner yokes inserted to keep the same socket.

بلد:	China
نموذج رقم:	CTL-torque limiter
سعر فوب:	(قابل للتفاوض) أحصل على آخر سعر
الموقع:	SHAN
سعر الحد الأدنى للطلب:	-
الحد الأدني للطلب:	10
تفاصيل التغليف:	WOOD
موعد التسليم:	15DAYS
القدرة على التوريد:	100
نوع الدفع:	T/T
مجموعة المنتج :	-