الوصف

The DIGITAL-ANALOG LAB is intended for elementary as well as advance training of Digital & Analog electronics. The trainer covers regular digital & analog circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules, through use of 2mm brass terminals and patch cords. Various clock generators, logic level /output indicators and DC regulated power supplies etc. are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual and Component Set.

FEATURES:
- Bread Board : Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with ***0 tie points and 4 Distribution Strip swith **0 tie points each, totaling to ***0 tie points. (Size:**2mm x**0mm)
- Regulated DC Power Supply : *5 V at 1 Amp, *5 V at 1Amp, **2 V/ 0 to *0V at **0mA, and **2 V/ 0 to **0 V at **0 mA
- AC Supply : ****5V, ******0V at **0mA. Can be used as 5V, *0V, *5V, *0V, and also as center tap
- Function Generator : Sine / Square / Traingular / Pulse waveform frequency 1 Hz to **0 Khz in 5 Steps. Variable in between steps. Sine / Square / Traingular waveform output *0mV ~ *0Vpp variable
- Clock Generators : 0.1Hz and **0 Hz, Independent fixed TTL 5V outputs
- Variable Clock Generators : low frequency variable clock 1 Hz to *0 Hz Fixed TTL 5V output
- Pulser Switch : 2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the counter after every clock pulse)
- Data Switch : *6 independent logic level s to select High / Low TTL levels, each with a LED to indicate high / low status and termination
- Logic Indicators : *6 independent buffered logic level indicators for High / Low status indication of digital outputs
- Speaker : 8 ohms miniature speaker with terminations
- Digital meter (3½Digit) : Dual range DC Voltmeter ***0V / Ammeter ****0mA
- Continuity Tester : For testing the continuity. Provided with Beeper Sound
- Potentiometers : 6 Potentiometers (1K, *2K, *7k, **0K, **0K and 1Meg) with terminals
- BNC to banana adapter : 2 Nos. BNC to 2 channel banana adapter
- Computer interface : Facilities connecting your trainer to either Rs**2 communication port of PC ADAPTER using *5 pin (male) connector through *5 nos. of 2 mm banana sockets
- On Board Switches : 2 Switches singal pole double through
- Connecting terminals : 2 / 4 connecting terminals
- Seven segment LED Display : 2 Nos. BCD to Seven Segment Decoder/ Driver IC with terminals
- LED Bar Graph : With *0 LED Indicators and *0 termination
- Logic Probe : Logic level indicator for TTL/CMOS
- Power : **0 V ± *0%, *0 Hz