Dreambox 500HD DM500HD

الوصف

*0/**0Mbps Ethernet Interface 
HDMI port 
eSATA

Specifications 
**0 MHz MIPS Processor 
Linux Operating System 
2 x LED - Display 
MPEG*2 / H.**4 Hardware decoding 
Tuner: DVB-S2 
1 x Smartcard-Reader (Dreamcrypt CA) 
eSATA 
service mini-USB 
*0/**0Mbps Ethernet interface 
1 x Scart (RGB, CVBS, YUV or S-video), 
HDMI 
analog modem 
S / PDIF optical connector 
*4 MByte Flash, **6 MByte RAM Unlimited channel lists for TV / Radio Channel change in less than a second full automatic service scan supports directly bouquet-lists supports EPG (electronic program guide) Teletext decoder supports multiple LNB-Switching control (DiSEqC) OSD in many languages ​​and skin-support External *2V power supply

DreamBox DM **0 HD technical data 
DBS-Tuner DVB-S2:

Frequency Range **0 .... ***0 MHz 
Demodulation DVB-S (QPSK) DVB-S2 (8PSK, QPSK) 
Symbol rate DVB-S: 2 ... *5 Mbaud / s, SCPC / MCPC 
DVB-S2: ****1 Mbaud / s (8PSK), *0 - *0 Mbaud / s (QPSK)

Video decoder: 
Video Compression MPEG*2 and MPEG*1 compatible, H.**4 
Video Formats 4:3 / *6:9 
Letterbox for 4:3 TV-Device?

Audio decoder: 
Audio Compression MPEG*1 & MPEG*2 Layer I and II 
Audio Mode Dual (main / sub), Stereo 
Frequency: *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz

Output analog: 
Output Level L / R 0,5 Vss on **0 Ohm 
THD> *0 dB (1 kHz) 
crosstalk <**5 dB

Output digital: 
Output Level 0,5 Vss on *5 Ohm 
Sampled Data Filtering *2 kHz, *4.1 kHz, *8 kHz 
S / PDIF optical out, TOSLINK

Video parameter: 
Input Level FBAS 1 Vss + / - 0.3 dB on *5 Ohm

Video parameter: 
Input Level FBAS 1 Vss + / - 0.3 dB on *5 Ohm 
Teletext filter in conformity with ETS **0 **2 Standard

TV-Scart: 
Output: CVBS, YUV, RGB, S-Video

Mini USB service interface 
Function Update of Firmware

Ethernet: 
*0/**0 MBit compatible interface 
Function: Update of Firmware

Analog modem: 
analoge modem for Internet access

LNB power supply: 
LNB Current **0mA max. In short-circuit proof 
LNB Voltage vertical <*4V without load,> *1,5 V at **0mA 
LNB Voltage horizontal <*0V without load,> *7,3 V at **0mA 
LNB shut-off at Standby-Mode

Count of active satellite position: 
DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control

Power consumption: 
<*2W at *2V operation 
<1W standby

Input voltage:

External PSU 
Input: 
******0V AC / ****0Hz / 0,6 A 
Output: 
*2V = / 3,0 A

General: 
Ambient Temperature **5 ° C. .. **5 ° C 
Humidity <*0% 
Dimensions (W x D x H): **5mm x **0mm x *0mm 
Weight: 2kg