الوصف
I. General Description
The automatic filling production
line for high-accuracy fire extinguisher is a new product
designed and manufactured by the scientific research persons of
our company through consulting and following the requirements and
the features for the production of domestic and foreign fire
extinguisher. Its success marks the fire-extinguish filling
automation to step on a new stage. This automatic production line
is equipped with relevant high accuracy sensors, under the
control of the programmable logic controller (PLC), to conduct
testing and monitoring for various parameters such as speed,
location, weight, torque, sealing performance etc., to form a
closed ring control system. All working position transfers and
actions adopt air pressure transmission and control so that it is
automation equipment that has integrated optical, mechanic,
electric, pneumatic and power components into a whole. This
product is mainly composed of below units: supporting roller
conveyer, original agent source device, rough filling and fine
filling system, vibration filling valve, cylinder valve turning
tightly, pressurizing work position, leakage inspection, label
sticking or silk tape printing etc, each of which can work as an
alone unit, also can be organically combined to generate an
automatic production. With manpower saving and high output, each
production line needs only 2 or 3 men to complete assembling
work. Taking a 4kg fire extinguisher as an example: It can
produce **0 products each hour. This company is proud of the
production experiences over *0 years. This company can produce
various equipment for five extinguisher production based on
special requirements from the customers.
II. Main Technical Parameters of
Product
2．1 Productivity: 4kg fire
extinguisher **0
cylinder/hour
2．2 Conveying linear
velocity：
6 m/min
2．3 Filling speed：
*0kg/min
2．4 Accuracy of filled
amount： ≤0.7%
2．5 Air driving pressure：
0.4—0.8Mpa
2．6 Power supply wiring：
AC**0V/**0V/*0Hz
III. Installation of
Equipment
After the equipment arrives at
site, the main conveying line and inverse transfer line of the
roller conveyer are first put on the ground level for connection,
then the perpendicularity and parallelism of the conveyer are
adjusted. Take the ground level as the reference to adjust the
perpendicularity of the whole line to be not lower than grade *1,
the parallelism of both end supporting frames of the support
roller shall not be lower than grade *0. Then the tray elevating
mechanisms at both ends of the conveyer are mounted. Because the
transfer mode of the elevating tray with the conveyer is friction
transmission, so the distance between the driving wheel (the
roller drive wheel of the conveyer) and the driven wheel (the
roller drive wheel of the receiving tray) can not be greater than
1 mm when adjusting the distance between the driving wheel and
the driven wheel. (The driving wheel is a steel part, the driven
wheel is a polyurethane part.) Certainly, it is determined based
on mounting. It is available when elevating is free without
impact. Then in accordance with rough filling, fine filling,
vibration inserting valve, turning tightly mechanism, air
charging unit, air sealing mechanic arm etc sequences to position
them beside the conveyer in a proper order. The positioning
distance between each work positions takes the bottom hole of the
master work position interceptor as reference. Then the vacuum
device, dust removing device, original agent source and the
support are put behind the production line and reasonably laid
down. The powder sucking tube for rough filling is connected with
the agent source powder outlet through a vacuum device, the
suction tube is connected with the vacuum device. The one end of
the power replenishing tube of the fine filling is connected with
the fine filling storing power cylinder, the other end is
connected with the another powder outlet of the agent source. The
pneumatic air source and air storing cylinder of the whole
machine are well connected. The transfer, positioning and air
supply for the whole machine are supplied by the air compressor.
The dust removing device has two pipelines, one pipeline is
connected with the rough filling, another pipeline is used for
fine filling dust removing. The sensing line of rough filling
weighing sensor is connected with the rough filling weight meter,
the sensing line of fine filling weighing sensor is connected
with the fine filling weight meter. The connecting mode is butt
joint. Finally the power supply wiring is well connected. Adopt
AC **0V/**0V/*0Hz.
| بلد: |
China |
| نموذج رقم: |
Dry-powder filling automated product line
|
| سعر فوب: |
0 ~ 180000 ( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
China |
| سعر الحد الأدنى للطلب: |
- |
| الحد الأدني للطلب: |
1 |
| تفاصيل التغليف: |
wooden box |
| موعد التسليم: |
15 days |
| القدرة على التوريد: |
10 |
| نوع الدفع: |
L/C, T/T |
| مجموعة المنتج : |
fire fighting
|
