Epm5600 Watt Meter/Panel Meter

الوصف

Work
Voltage (J1) AC*5V~**5V Power consumption <1.5W operating frequency *5~*5Hz
Power measurement range 0~***0W Power resolution 0.*1W[1] Power measurement Accuracy 0.5%FS
Voltage range(J2) AC*5V~**5V Voltage resolution 0.1V Voltage measurement

Wiring instruction:
Terminal 1, 2 are the power supply for the tester, the voltage range is AC*5~**5V;
Terminal 3, 4 are the power supply for the Loads, the voltage range is AC2~**0V;
Terminal 5, 6 are the output for the Loads, which will be connected to the Loads, its output voltage is the same as terminal 3, 4
Wiring must be connected as shown above method, or it may cause damage to the tester.
Note: EPM***0 is No shell. There is high voltage when switch-on, Banned any part of the body contact the circuit board.
 
Functions Set
Set the hours per day for Annual Energy Consumption
Press the Set of the hours one day for > 2 seconds and in to the mode of Hours setting. Press the Set then the hours will increase 1, when the hour is *4, press the again, the hour will return to 1, 2 seconds later the meter will automatically return to work. Long press the will make the process become more quickly.
Set the rate of Electricity Bills

Press the Set of the rate of Electricity Bills for > 2 seconds and go into the process of the rate of Electricity bills setting, press the Set again then the rate of Electricity Bills will increase 0.*1, it will decrease 0.*1 when you press the Set of the hours, 2 seconds later the meter will automatically return to work. The rate of Electricity Bills can be adjusted between 0.****9.*9, Long press the to adjust process can make the process be quickly.