Equivalent Alfa Laval M30 Plate Heat Exchanger

الوصف

Standard Disgin
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled 
between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the inter plate channel and directs the fluids into alternate
channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and 
support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a 
support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.
Working principle
Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels,
and complete counter_current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the 
turbulence, resulting in efficient heat transfer.
Efficiency and Flexibility
· High heat transfer efficiency
· Easy to repair and cleaning
· Low fouling factor
· Compact structure, lightweight
· Easy to adjust heat transfer surface or plate arrangement

Plate Material
**4 Stainless Steel
This is the lowest cost heat transfer plate material. It has a low corrosion resistance
and is usually only available in a thickness of 0.4mm. This type of heat transfer plate
is typically used on HVAC applications.

**6 Stainless Steel
This is the most common heat transfer plate material and is used in many applications.
**6 stainless steel has a high corrosion resistance and is typically available in thickness
from 0.4mm up to 0.8mm.

Titanium
This has a very high resistance to chemical attack including most acids, chlorides,sea water,and chlorine chemicals. Titanium is usually available in thicknesses from 0.5mm up to 0.6mm
Hastelloy C**6
Other common names: Alloy C**6, Hastelloy C, Inconel® C***6 Hastelloy C***6
Hastelloy C**6 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C***6 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas. Thickness available from 0.6mm to 0.8mm.
SMO **4
Sandvik **4 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media. Thickness available from 0.6mm to 0.8mm.
Company Introduction
VHX is a leading manufacturer in the heat exchanger industry with over *5 years of experience, and located in Liaoning China.