ethernet

الوصف

HDMI Over Ethernet
1.Introduction
2.Specifications
3.Package Contents
4.Panel Descriptions
5.Connection and operation
6.Application diagram
 
1.Introduction
HDMI Over Ethernet is based on TCP/IP standard. It transmits your HD display with the high resolutions up to **0 meters away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard,you can extend your HD video to multiple displays by using an Ethernet Switch.

	Sample rate:*2kHz,*4.1kHz,*8kHz
IR remote control	*8kHz;NEC
HDMI	HDTV Resolutions	**0p,**6p,**0p,***0p
HDCP	HDCP 1.2
Power adapter	Input:**0V***0V(****0Hz)   Output:5V/1A
Power consumption	HDMI Sender:3W    HDMI receiver:3W
Size(L-W-H)	*2x*9x*0mm
Weight	**0g x 2
Operating Temperature/Humidity	0ºC**0ºC/*0%**0%RH(no condensation)
Storage Temperature/Humidity	**0ºC**0ºC/5%**0%RH(no condensation)

2.Specifications
   Following TCP/IP standard.
   Support HDMI1.3 protocol.
   HDCP1.1 & 1.2 protocol compliant
   Support point-to-point mode, one point-to-many mode and cascade connection mode.
   Support IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.
3.PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1)  Main unit No. 1 Sender , Main unit No. 2 Receiver
2)  Two pieces of 5V DC Power Supply.
3)  one piece of IR transmitter and one piece of IR receiver
4)  User's Manual

Reset	Hold down the key,the model will re-start
IR-out	Connect IR transmitter this Port
HDMI-in	Connect HDMI sink source to this Port

5V/1A	Supply power for the Receiver
Reset	Hold down the key,the model will re-start
IR-in	Connect IR Receiver this Port
HDMI-out	Connect HDMI sink device to this Port

5.Connection and operation
1) Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of Sender.
2) Connect the IR sender to the Sender IR OUT Port, and Be Directed at HDMI video source's IR receiver.
3) Connect the HDMI out of Receiver to HDTV display.
4) Connect the IR receiver to the Receiver IR IN Port.
5) Use one Cat5e/6 cable up to **0m to connect the Sender and Receiver.
6) Plug two pieces of 5V power supply into the Sender and Receiver.
7) Power on the HDTV display and HDMI source. 

Audio	Sample rate:*2kHz,*4.1kHz,*8kHz
IR remote control	*8kHz;NEC
HDMI

بلد:	China
نموذج رقم:	Xhy-Ex01
سعر فوب:	34 ~ 34.5 / Box (قابل للتفاوض) أحصل على آخر سعر
الموقع:	Ã��Ã�¦Ã��Ã�ÂÂ&mi
سعر الحد الأدنى للطلب:	34 per Box
الحد الأدني للطلب:	10 Box
تفاصيل التغليف:	Gift Box
موعد التسليم:	1
القدرة على التوريد:	50000 Box per Year
نوع الدفع:	T/T, Western Union, PayPal
مجموعة المنتج :	分配器