الوصف
2. Technical Parameters:
1) Production scope: the diameter of the conductor: 1.**8mm
Finished diameter size: 2.***0mm
2) Extrusion capacity: Max *0kg/hr
3) Motor Power: *5kw (frequency conversion)
4) Heating power: *6kw (three section heating with air cooler)
5) Center height of the machine: ***0 mm
6) Pay-off spool specification: diameter **0mm (PN ******0mm)
7) Take-up spool specification: diameter **0mm (double spool)
3. Composition of the
equipment
1) **0mm No-spool
pay-off
2) Elevating tension
straightening machine
3) SJ*5
extruder
4) Water cooling
sink
5) Dry-printing
device
6) Diameter measure
device
7) **0 mm/ **0mm wheel
traction machine
8) **0mm double spool
take-up machine
9) Control
box
4. The technical parameters
and structure of the main part
1) Diameter **0 No shaft
pay-off frame
It is used the Manual
single-arm up and down screw pay-off frame, the spool was fixed on
its top. Ensure its placidly when paying-off
2) Elevating tension
straightening machine
It is fixed by two
columns, Make sure the tensioner slide up and sown smoothly. The
tension magnitude can be chosen at random
3) SJ*5
extruder
**3 type Hard tooth
surface reduction gearbox, screw, sleave are all made of good
Quality
*8CrMoAL steel materials,
processed by nitrogen treatment, the thickness of the
Nitride
layer is 0.4 to 0.8mm, Hardness
HB is more than or equal to **0, screw scale length ratio diameter
*5: 1, Designed specifically for processing PVC, PE cable. The
power of the electric machine is *5kw. The host was heated by Metal
heater or Cast aluminum heater, the temperature was controlled by
Homemade premium temperature table, automatic cooling by air
blower, 4 section heating. the temperature will be controlled
accurate to plus or minus 2 centi-degree. It is convenient to
operate so can save time and labor at last. (The maximum aperture
diameter is *8mm), the plastic output: (PVC or PE) PVC is more than
or equal to *0kg/hr.
4) Cooling
sink
The length of the
Stainless steel sink is 6 meters, the Height can be
adjusted.
5) Dry-printing
device
Using **0w pressurized air
pump, can dry away the water of the cable surface effectively,
ensure the printing firm and clear.
6) Counting
device
Using mechanical
revolution counter to count the meters, bevel gear drive. Ensure
the accuracy of the meter.
7) Traction
machine
It was made of milling
after low carbon steel plate welded with the tank, all the gears
are cast steel processing gears, three stalls, noise-free when
transmission, stable and reliable.
Main traction wheel
diameter: **0mm
Passive wheel diameter:
**0mm
The stall can be changed
randomly according to the line speed, no oil-leaking
8) **0mm double spool
take-up machine
The take-up machine was made of
milling after low carbon steel plate welded with the tank, sprocket
transmission, double take-up drums can be changed easily, using
torque motor, the tension magnitude can be chosen at
random.
9) Control box
Using frequency or speed control
device, speed stable, reliable quality, the temperature was
controlled by Homemade premium temperature table, the temperature
will be controlled accurate to & plusmn; 2
centi-degree.
| بلد: |
China |
| نموذج رقم: |
SJ65/25
|
| سعر فوب: |
32000 / Set (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
Hebei province |
| سعر الحد الأدنى للطلب: |
32000 per Set |
| الحد الأدني للطلب: |
1 Set |
| تفاصيل التغليف: |
Plastic wrapping and protected by sturdy steel shelves. |
| موعد التسليم: |
Shipment to be effected within 45 days upon 30% do |
| القدرة على التوريد: |
50 Set per Month |
| نوع الدفع: |
T/T, L/C |
| مجموعة المنتج : |
Wire and cable machine
|
