FE1 Fiber Modem

الوصف

Product Introduction

FE1 Fiber Modem is a high-performance E1 fiber optic modem developed by using a dedicated integrated circuit. It is to modulate a framing or non-framing E1 data signal directly into single- or multi-mode optic fiber for a transmission via optic cable line. At another end of the optic cable, optical signal is demodulated into a framing or non-framing E1 data signal. E1 interface may be directly connected with the E1 interfaces of image and data terminals or the WAN ports of MUX, exchanger and router for a dedicated network setup or a LAN connection

Technical Specification

• Conforms to all relevant ITU series standards( ITU-T G.**3 G.**4 G.**3)
• Transmit one E1 channel
• Framing or non-framing mode in option
• E1 time slot in arbitrary option
• Balanced **0Ω/non-balanced *5Ω interfaces in option
• Support the loopback of local analog/digital interface
• Support remote loopback function (valid on under framing mode)
• Support pseudo-random code test function, providing convenience for the test of optic fiber line status
• **0km trunking -free transmission distance for single-mode optic fiber
• 2km trunking-free transmission distance for multi-mode optic fiber
• Capable to be communicated with V*5 Fiber Optic Modem
• Available with complete line detection and alarm indications
• Available with independent structure and **-inch frame-mounted structure (frame-mounted structure can be inserted with *6 modules)
• AC **0V and DC –*8V s may be selected for fiber optic modems of both structures
• For frame-mounted fiber optic modems, dual power supply heat backup is provided to ensure a high operating reliability Power consumption：  3W
  Operating temperature：  0℃～*0℃
  Storage temperature：  **0℃～*0℃
  Humidity：      5%～*0% (free of condensate)
                                                                                                                                             Optic interface:
  Line mode type： CMI
  Line mode rate： 2.**8Mbps
  Operating wavelength：**0nm,***0nm or ***0nm
  Optic fiber connector：SC/FC
  Applicable optic fiber：multi-mode, single-mode
  Transmission distance：
  Single-mode：up to **0km
  Multi-mode: up to 2km                                                                                                                             E1 interface：
  Standard：ITU-T G.**3 G.**4
  Frame structure：framing CCS（PCM*1）/ CAS（PCM*0）
                             Non-framing
  Rate：N×*4Kbps （N=1~*1）or 2.**8Mbps
  Impedance：*5Ω，physical interface  BNC
                     **0Ω，physical interface RJ*5
  Code：HDB3
  Receiving level：0~**3db                                                                              Indicator lamps：To indicate the operating status of power supply, loopback and random code test, code missing alarm, out-of-frame alarm etc.
  Structure：Independent：**0mm(depth) x **0mm(width) x *2mm(height)
                  Frame-mounted： *9in 4.5U standard casing
  Power supply：
  Independent：**0V～**0V AC ，5V/2A output
                       **0V～**0V DC ，5V/2A output
  Frame-mounted：**0V～**0V AC ，5V/*6A、*2V/1A output
                            **8V～**8V DC ，5V/*6A、*2V/1A output
  Power consumption：  3W
  Operating temperature：  0℃～*0℃
  Storage temperature：  **0℃～*0℃
  Humidity：      5%～*0% (free of condensate)