سعر فوب
أحصل على آخر سعر1 ~ 1000 / Unit
|10 Minimum Order
بلد:
China
نموذج رقم:
-
سعر فوب:
1 ~ 1000 / Unit أحصل على آخر سعر
الموقع:
China
سعر الحد الأدنى للطلب:
1 per Unit
الحد الأدني للطلب:
10
تفاصيل التغليف:
container
موعد التسليم:
10-30 days
القدرة على التوريد:
10000000 Unit per Month
نوع الدفع:
T/T, L/C
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Carson
Nanjing, Jiangsu
Fiberglass FRP Pipe Fiberglass Process Pipeline
Common specifications and models of FRP process piping
1: Can be made according to user needs
2: Can be produced according to national standards
specifications(mm) | specifications(mm) |
**0*L****0 | **0*L****0 |
***0*L****0 | ***0*L****0 |
**0*L****0 | **0*L****0 |
***0*L****0 | ***0*L****0 |
**0*L****0 | ***0*L****0 |
***0*L****0 | ***0*L****0 |
**0*L****0 | ***0*L****0 |
***0*L****0 | ***0*L****0 |
***0*L****0 | ***0*L****0 |
***0*L****0 | ***0*L****0 |
FRP process pipe is a new type of composite pipe with excellent performance. It has the incomparable performance of other traditional pipes (metal pipes, concrete pipes, plastic pipes).
Characteristics
of FRP Process Pipeline
1. Process glass fiber reinforced plastic pipes have excellent
physical properties. The specific gravity of glass fiber reinforced
plastic pipes is 1.**2.1, which is about 1/4 of steel. It has
higher specific strength than steel, cast iron and plastics. The
weight of glass fiber reinforced plastic pipes is generally not
greater than that of steel pipes of the same specification. 1/3,
excellent physical and mechanical properties. In addition, the
expansion coefficient of FRP pipe is roughly equivalent to that of
steel, and the thermal conductivity is only 0.5% of steel. It is a
good thermal and electrical insulator.
2. Process glass steel pipe is resistant to chemical corrosion, has
a long service life, and is suitable for conveying various acids,
alkalis, salts and organic solvents and other different media.
3. Process FRP pipes have excellent hydraulic properties, and
hydraulic properties are one of the important features of FRP
pipes. Excellent hydraulic characteristics means that the fluid
head loss is small, and a smaller pipe diameter or smaller power
delivery pump can be selected, thereby reducing the initial
investment of pipeline engineering, saving power, and reducing
operating costs. The inner surface of FRP is quite smooth.
Generally, the surface roughness can be 0.**8, which can almost be
regarded as a "hydraulic smooth pipe". During operation, the inner
surface of steel pipe, cast iron pipe, cement pipe, etc. often
undergoes local corrosion and becomes more and more Rough, while
the glass fiber reinforced plastic has always maintained the smooth
surface of the new tube.
4. Process FRP pipe installation and maintenance costs are low.
Generally speaking, FRP pipe does not require special
anti-corrosion treatment; the insulation layer can be thinned, or
even no additional insulation treatment; the pipeline is relatively
light, the lifting equipment is small in tonnage, and the power
consumption is low. The length of FRP pipes is longer than that of
cement pipes and cast iron pipes, and the joints are relatively
reduced, which will reduce installation and maintenance costs. This
has been proved by many engineering practices at home and
abroad.
5. The design flexibility of process FRP pipes is large, and the
modification period is short. FRP is made of fiber reinforced
material impregnated with a resin matrix, wound layer by layer on a
core mold according to specific process conditions and properly
cured. The tube wall is a layered structure, which can be changed
by changing the resin system or using different Reinforcement
materials are used to adjust various physical and chemical
properties of FRP pipes to adapt to different media and working
conditions to make FRP pipes with different pressure levels or with
certain special properties. The short modification period is a
remarkable feature of fiber-wound composite materials, which cannot
be compared with isotropic metal pipes.
بلد: | China |
نموذج رقم: | - |
سعر فوب: | 1 ~ 1000 / Unit أحصل على آخر سعر |
الموقع: | China |
سعر الحد الأدنى للطلب: | 1 per Unit |
الحد الأدني للطلب: | 10 |
تفاصيل التغليف: | container |
موعد التسليم: | 10-30 days |
القدرة على التوريد: | 10000000 Unit per Month |
نوع الدفع: | T/T, L/C |
مجموعة المنتج : | - |