الوصف

Tester for the fire propagation index with a calcium silicate board combustion chamber and a stainless steel support frame

Introducing the product

The test technique described in BS **6 part 6 provides a comparative measurement of the contribution to the spread of fire made by an essentially flat material, composite, or assembly. The test result is reported as a fire propagation index. Its main purpose is to evaluate the effectiveness of internal wall and ceiling linings.

Technical specifications

1. The stainless steel box support frame.

2. ***0W quartz radiator devices that provide thermal radiation to the sample.

3.stainless steel sample holders, a combustion chamber made of calcium silicate board, a T-type burner, and an open flame combustion mode are all included.

4.. The power output is automatically controlled, and the output power is automatically changed in accordance with the test duration; 6. The thermocouple continually records the difference between the temperature and the room temperature in the chimney; 7.

5. The computer may print test reports and automatically handle the data.

Product Specification and Use

1. Three alternative types of sample containers for specimens with varying thicknesses

2.Assembly of a chimney and cowl made of mild steel with a low reflecting black finish and mounting points for thermocouples

3. Gas burner made of compliant stainless steel.

4.Two thermocouples of the K type with mineral insulation and ceramic insulators.

5. The combustion chamber is equipped with two ****-watt pencil-style heaters.

6. Instrumentation for controlling gas flow, such as a manometer, a flow metre, and an electronic gas on/off valve.

7. Smart single phase power controller for precise regulation of electric heating elements

8.During the course of the test, the DAQ will automatically record the mV output from the flue gas thermocouples.

 

9. Automatically change the output power in accordance with the test duration.

Application: It is mostly used to assess how well wall and ceiling linings resist fire.

Product Information

The BS ****6 test method is a technique for figuring out a material's flame propagation characteristics. It is mostly used to assess how well wall and ceiling linings function in a fire. Flame propagation index is used to express the results. The test object was exposed to a tube torch during which time the lamp released **0 J/m of heat. The two electric heaters' combined wattage was set to ***0 watts at the end of the test's 2 minutes and *5 seconds. The power was decreased to ***0 watts after the first five minutes of the test and stayed there until the test was finished. The test took *0 minutes to complete.

Interface for Software Prompted by Data Acquisition System

Temperature of the cowl is recorded and displayed against time.

Temperature data are recorded and displayed against time.

An indication of power in kW

Calibration technique

Output increase and calibration value calculation

Standard:

BS:BS ****6

Dimension:

Dimensions: Device dimensions are **0mm (W) x **0mm (H) x **0mm (D)

**0 mm (W) x **0 mm (H) x **0 mm control module (D)

Installation requirements Weight: *6 kg

Power supply: **0 volts *0 nominal amps

Operating range of ambient temperature: *0 to *5 °C

Gas Resources: Standard test gas G**2, as described in BS ***7, is the gas supply that is mentioned in the Standard.

Gas flow for the burner is variable and ranges from 0 to 5 nl/min.

1 kPa of pressure