الوصف

 Features:

 YL3932ZTF1W2835H:

1.With 1 PC 2835 SMD LED every module, DC24V, 150 mA constant current

2.6PCS/Cluster, every cluster with a constant current source

3.With optical lens, big angle: the angle is more than 160 degree

4.Good color consistency between different batches. Especially suitable for big LOGO 

 YL3932ZTF1W2835:

1.Take 3 chip high brightness SMD 2835 LED as light source, long life span, low decay and good color consistency.

2.Injection outer cover with lens, SMD LED surface antiextrusion, good waterproof performance.

3.Constant voltage Input: DC12V, safe and not broken, free maintenance.

4.With series parallel connection circuit for LED PCB, 20pcs modules are connected to one string and each module can be cut individually.

5.Low cost apply: Viewing angle reach 160°170°, so can install less quantity.

6.Have SGS CE, RoHS certificates.

Technical data:

Product size and connect:

  YL3932ZTF1W2835H:

remarks:

1.LED module gray wire to the positive switching power supply , white wire to the negative switching powersupply, the working voltage of module and the output voltage of switching power supply must be consistent.

2.If more than 30 LED module , please separate the connection , then with the more than 1.5 square millimeter of high quality copper wire connected in parallel to connected to the letter box outside, power line length should be as short as possible.

3.If more than 3 meters Please add the line diameter , at the end of the line without module , to avoid short circuit must be cut , and paste must firmly .if necessary, fixed by self tapping screws.

4.Not waterproof series of outdoor use , slot type character must do waterproof measures.

YL3932ZTF1W2835:

remarks:

Usually, main power cable dimension is 2x1.5mm2. To prevent damage from overheating caused by overload, it is essential to take 0.75mm2/18 wire as  main power cable if needs longer cable. Cable length between power and module should not exceed 2m, otherwise it will increase total power consumption.

1.When use method 1 (single end power supply) in the connection diagram: The maximum cascaded of modules is 20 PCS,do not excess in the series;

2.When use method 2 (both ends power supply) in the connection diagram: The maximum cascaded of modules is 40 PCS,do not excess in the series;

3.Module installation: 1.Take off release paper from adhesive tape at the back of modules. 2.Stick modules inside light box or advertising signage for initial setting. 3.Fix module by 1 piece of ST2.9x10 mm self tapping screw or by glass glue at both sides of module.

4.Standard cascade number is 20pcs for each cluster; the modules can be cut individual according to the actual needs.

5.When need connect modules, using diagona
6.Peel off the cable coat by 10mm (around) then screwing lug insulation protection extra cables for the stringend module.

7.To make sure the waterproof and anticorrosive reliability; inject some silicon glue (neutral glass glue or waterproof glue) into the connection port for further protection. Dont touch or work with the modules with electrostatic.
8.Dont touch or work with the modules with electrostatic. Modules can not be fully exposed outdoor use.

9.Advise to use power supplies with related safety certificates (with short circuit prot

product:

All led module product:

Product applications:
 
(Injection LED modules China with big light angle, no shadow, low light fades, easy to install and free 
maintenance;widely used in threedimensional light words, house,office, advertisement restaurant,
hospital, grocery or casino.)
 
 

Packaging: