Floating PV Platform

الوصف

PHOTOVOLTAIC FLOATING PLATFORM
PRODUCTS SPECIFICATION
 
 
 
 
 
Sunglory
May ***6
1.OVERVIEW
Sunglory has began to study on the PV floating platform from the beginning of ***1, has already achieved related 9 invention patents, *2 utility model patents. Products have been identified through the Chinese Center for disease control and prevention, China classification society quality certification center about storm flow conditions test, and wind tunnel test of TV Rhineland and Guangdong Provincial Academy of Building Research. Sunglory has already had the design ability of floating PV power station solutions.
This product is mainly used for the floating PV power station. For PV modules, equipment and personnel to provide buoyancy, but also can stop the water floating objects, so as to avoid the damage to the PV module.
2.PRODUCT INTRODUCTION
2.1ADVANTAGES OF FLOATING PV POWER STATION
Floating PV power station is one platform with the photovoltaic modules floating on the water to generate electricity. Floating PV power station doesn't occupy land resources. Meanwhile, water, which has a cooling effect for photovoltaic modules, can prevent surface temperature increased and achieve more power output.
2.2MATERIALS & PROCESSING INTRODUCTION
The products are made of high density polyethylene (HDPE) production of the new import environmental protection material, which also add anti-aging, such as UV, guarantee products with enough toughness, hardness, to withstand natural environment changes and low temperature.
 
Whole product is produced by blow molding process, which is seamless, no water seepage, and durable.
2.3PRODUCT COMPATIBILITY
Product can be compatible with all crystalline silicon modules and double glass modules in the market.
Crystalline silicon modules width: **1 + 2 mm, module length: ***0 ~ ***0 mm.
Hanergy thin-film double glass modules: Solibro CIGS thin film double glass modules (L * W: ***9 * **9.5 mm)
2.4CHARACTERISTICS OF FLOATING PV POWER STATION
The Floating PV power station is no limitation for the installed capacity and off/on grid operation mode.  The floating power station layout is flexible, can be located close to shore or center of water area.
2.5ANCHOR INSTALLATION
Floating platform is to be fixed by anchor. Usually the anchor point is at the bottom of the waters, but also has a shore anchorage. Anchoring solution should consider the actual status of the project.
Water level change less than 1 m: the heavy anchor or sunken stone fixed.
Water level change < 3 m: add elastic spring between the cables and anchor/heavy stone.
Water depth change > 3 meters: use the winch type cable connected to heavy anchor/ heavy stone.
The targeted anchorage design will be carried out according actual project information.
2.6PRODUCT INTRODUCTION
This product mainly includes: main floating base, long rack, short rack, maintenance aisles, peripheral protection floating body, connecting pin bolts and gaskets, etc.
Main floating body (1floating base + 2 long rack+ 2 short rack) is mainly used for mounting photovoltaic modules and equipments. Using the connection holes on the racks to fix photovoltaic modules and equipment on the floating body, meanwhile, to provide buoyancy by the floating base.
Maintenance aisles are mainly used as aisles, to provide convenience for maintenance personnel. At the same time the maintenance aisles and the main floating body to be connected together to make the stability of the entire product increased.
Peripheral protection floating body is installed outside the PV array, the main purpose is to effectively connect the maintenance aisles between array, and to ensure that the entire array of photovoltaic power station to be a whole and its stability.
Connecting pin bolt is mainly used to tighten the floating body, maintenance aisle and the protection floating body. Meanwhile it has the self-locking functions to prevent loose.
2.7PRODUCT PERFORMANCE PARAMETERS
PERFORMANCE PARAMETERS LIST OF MAIN FLOATING BODY UNIT

	Materials	High density polyethylene(HDPE), in accordance with the Hunt water absorption test (CN), including anti aging, anti ultraviolet, etc.
	Wall thickness(mm)	4~5
	Weight(kg)	*1~*2
	Process	Blow molding
	Tilt angle	Support for photovoltaic modules, tilt Angle is *5 degree
Product Advantage: The diagonal connecting lug of the main floating body can bear the pulling force far super domestic and foreign similar products (***0daN), ensure no deformation and fracture; the inclination angle is more suitable for the light condition of mainland China and Hong Kong, Macao and Taiwan for more capacity.

 
 
PERFORMANCE PARAMETERS LIST OF MAINTENANCE AISLE

	Materials	High density polyethylene (HDPE), in accordance with the Hunt water absorption test (CN), including anti aging, anti ultraviolet, etc.
	Wall thickness(mm)	4~5
	Weight(kg)	*1~*2
	Process	Blow molding
	Function	Ensure that modules no shadows and the aisle with anti slip texture.
Advantage: The diagonal connecting lug of the main floating body can bear the pulling force far super domestic and foreign similar products (***0daN), ensure no deformation and fracture; There are two kinds of Aisle, is compatible with CIGS PV modules and crystal silicon PV modules of different length.

 
PERFORMANCE PARAMETERS LIST OF CONNECTION PIN

	Materials	Reinforced nylon (PA*6)
	Pin weight(g)	**4
	Process	Injection molding
	Function	Connecting and fastening the main floating body and the aisle, with the position-limit and self-locked functions

2.8PRODUCT DIMENSION

NO.	DESCRIPTION	DIMENSION(mm)
1	Main Floating base	***1×***1×**0
2	Maintenance aisle	***0***0***0
4	Long rack	**7***9***0
5	Short rack	**2***5***0
6	Blow molding screw group (main floating base)	Ф*0**0
7	Plastic nut	Ф*0**5
8	No.2 Protection aisle buoy (protection)	***0***0***0
9	Blow molding screw group (protection)	Ф*0**0
*0	Photovoltaic (PV) bolt	Ф*2***1
*1	gasket	Ф*0**6

 
 
 
2.9PRODUCT ACCEPTANCE CRITERIA

NO.	CONTENTS	ACCEPTANCE CRITERIA	REMARK
1	Product Appearance	Product should be no obvious cracks Product lugs should be smooth and without bending down Connection hole should be no obvious burr
2	Product sealing mouth	Sealing plug should provide with seal ring Sealing plug should apply sealant when screwed in Sealing plug should be screwed tight, not leak, water leakage
3	Racks	The mounting holes of supporting racks should be through
4	Product Size	Main floating body(L*W*H):***0****0***0	The installation hole pitch (tolerance±3mm)
5		Aisle1(L*W*H):***0***0***0	The installation hole pitch (tolerance±3mm)
6		Aisle2(L*W*H):***0***0***0	The installation hole pitch (tolerance±3mm)
7		Protection-Aisle(L*W*H):***0***0***0	The installation hole pitch (tolerance±3mm)
8	Color	Grey

3.STANDARDS AND SPECIFICATIONS
Conforms to the ***1.******8 GB water absorption test standard
Safety evaluation criteria for *********8 GBT drinking water equipment and protective materials for drinking water
3.1PRODUCT APPLICABLE ENVIRONMENT
Floating PV power station potential areas:
Reservoir
Lakes
Pond
Industrial waste water pool
Subsidence water area of coal mineral

Environment conditions:
Ideal water velocity: no more than 1 m/s
The applicable temperature: - *0 ºC to *0 ºC
Snow load: to *0 DaN /m2
Wind load: not less than *0 m/s.

3.2PRODUCT PACKAGING &TRANSPORTATION
This product need no special packaging (attachments packaged with woven bags, large products without packing).
Transport by land, water transportation, etc.

بلد:	China
نموذج رقم:	-
سعر فوب:	( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	-
سعر الحد الأدنى للطلب:	-
الحد الأدني للطلب:	50 Kilowatt
تفاصيل التغليف:	-
موعد التسليم:	-
القدرة على التوريد:	-
نوع الدفع:	T/T, L/C
مجموعة المنتج :	-