الوصف
Currently PCBN inserts which incorporate a C-lock hole clamping
system, are produced with a tungsten carbide blank in which a PCBN
tip is brazed into corner pockets.
Several weaknesses have been identified in the
current tipped concept such as limited depth of cut due to small
PCBN tip size and braze joint failure during machining. The
new range of PCBN inserts with C-lock hole clamping systems offer a
unique solution to the weaknesses identified.
By using a format where a full faced PCBN layer
runs across the top of the insert, depths of cut are no longer
limited by tip size and with no braze joints or PCBN pockets, the
cutting edge will never be lost to braze failure.
By combining the latest holemaking technology with full faced PCBN
blanks, VICDO Tools are able to produce the complex C-locking hole
system directly into the PCBN/tungsten carbide layer.
This offers you
the following advantages:
• Low cost per edge
• Full faced PCBN format which is integrated into the WC
backing
• Multiple cutting edges
• Positive geometries for reduced cutting forces
• No braze joints
• Extensive range of insert geometries
• Available in two PCBN grades, CBN*0 and CBN**0
• Available for both roughing and finishing operations
By replacing the limitations of pocketed PCBN
tips with an integral full faced PCBN layer, the new VICDO PCBN
C-lock inserts offer unrivalled machining opportunities such as the
ability to rough at greater depths of cut or use other machining
techniques such as plunge turning or milling.
This new concept is available in two VICDO
grades, CBN*0 for the finishing of hard steels and CBN**0 for the
roughing and finishing of grey irons and powdered steels as well as
the roughing of hard steels and irons.
The new concept is also very cost effective. By eliminating the
pocketing and brazing process during manufacture, VICDO Tools are
able to make the cost per edge of these inserts very competitive.
بلد: |
China |
نموذج رقم: |
VCB
|
سعر فوب: |
( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
China |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
100 Piece |
تفاصيل التغليف: |
plastic box |
موعد التسليم: |
15~20 working days |
القدرة على التوريد: |
10000 Piece per Month |
نوع الدفع: |
L/C, T/T |
مجموعة المنتج : |
PCD PCBN Tools
|