الوصف

The navigational subscriber terminal iON Base— is an ultimately functional device you can install on the vehicle  to monitor its location, direction and speed, parameters of its functioning and state of sensors and devices connected to the terminal. iON Base can be installed on any type of vehicle including construction equipment.
The navigational terminal receives information about its location coordinates, current time, speed and movement direction from global positioning system satellites — GPS and GLONASS. If access to satellites is absent (above-ground parkings, ferroconcrete ceilings and other disturbances) the location is determined using the nearest GSM stations. Data gathered from satellites and readings received from connected sensors are transferred to the dedicated server through the GSM network. Using a comfortable web-interface, the system user can monitor location and state of equipment operation parameters using a PC, laptop, mobile phone or data tablet from any place in the world.
 
Supported interfaces:
- Two *-Wire protocols allow installation of i- and temperature sensors.
-  RS***5 standard allows to install different sensors, indicators and additional devices.
-  CAN protocol receives information directly from trip-computer (fuel level and consummation, axle pressure, engine rotation speed, engine load and other indexes)
In case of absence of the network, all information received by the terminal is recorded to high volume built-in memory (**8 Mb). This volume is sufficient for storing 2,5 million records. In case of cellular communication cut-offs, zero balance of SIM-cards, failures in the operation of data gathering servers navigational terminal iON Base can store big volumes of information. Data may be transferred to the server during connection reactivation, in case of connection to the PC or through the USB-memory (flash memory). In the course of information unloading to flash memory the protection system with a built-in key is used. There is a unique mechanism of data transfer realized in iON Base, all the information is transferred to the server by two independent data bursts. The navigational terminal is highly reliable and fault resistible. There are two slots for SIM-cards that help reduce traffic costs and prevent disconnections. The device is protected against extraneous intervention— all plugs intended for connection of wires, antennae, SIM-cards are concealed under the cover. When the body is opened, the terminal gives a signal to the server. The fact of opening is displayed in the dispatcher program in the form of a message.  iON Base has a possibility of remote update of the terminal F/W.
iON Base is equipped with built-in lithium-polymeric rechargeable battery (Li-Pol) with high capacity —***0 mA/h. It provides the terminal with a possibility to function uninterruptedly for a long period in case of absence of external power supply.
 
Principal Functions of iON Base:
• Determination of  observed objects speed direction and location in real time
• Data acquisition from various connected sensors
• All data transfer to the server (scheduled or by demand)
• Notification of dispatcher on "alarm events" (interruption of power supply, bringing outside aerials out of operation, unsanctioned decapsulation, exceeding of speed mode and etc.). Possibility of SMS and e-mail notification.
• Data storing in the non-volatile memory
• Driving style analysis
All IRZ equipment has an open protocol and can be integrated into different monitoring systems.