الوصف
Automatic clamp, centralize the web and flange, align and weld them
together. The H beam automatic assembly machine can improve the
working efficiency by more one time than manual operation. The main
engine drive is controlled by imported AC frequency adjustor to
make sure stable and reliable. There is pilot arc device to ensure
welding quality and accuracy.
Main Features:
1, Equipment structure types: Machinery stationary, workpiece
automatic through;
2, Applicable workpiece specifications: Web height:
*******0MM;Flange width: ******0MM; Length: *********0MM;
3, Clamping way: Web and flange automatic clamping;
4, Hydraulic system: With the pressure keep and time delay;
5, Main drive control: AC motor + cycloidal reducer;
6, Adopt imported technology of frequency converter to AC frequency
convertor centralizes and locates the web and flange, and realize
automatic working;
7, CO2 gas shield welding or manual welding is optional for
user.
The positioning of web and flange is realized with hydraulic drive,
on the two sides, the mechanical clamping and centralizing is acted
synchronously, to ensure web and flange positioning with various
sizes within allowed range.
The automatic centralizing is accurate and needless to adjust each
time(no center deviation wheel for minor adjustment). When
assembling, there is automatic hydraulic holding frame which can go
up and down, to make sure web and flange are in matched position.
The upper beam has 4pairs of guide on the left and right to make
sure stabilization.
The automatic welding system is driven by light cylinder without
compressed air source. The inlet and outlet table roller and inlet
tension rod are sectional type, and can add and remove according to
customer need.
Supply scope:
1, The main structure: Main frame, upper gate frame, synchronous
clamping and centralizing system of web and flange, main
transmission motor reducer.
2, Inlet table roller system: Active and passive table roller:
2.6m*3sets, tension rod: 3 sets.
3, Outlet table roller system: Active and passive table roller:
2.6m*3sets.
4, Hydraulic system: Oil bump station, high pressure rubber pipe,
and hydraulic cylinder.
5, Electric control system: Electric cabinet, AC frequency
converter and etc.
بلد: |
China |
نموذج رقم: |
z15/18/20
|
سعر فوب: |
20000 ~ 29167 / Set (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
20000 per Set |
الحد الأدني للطلب: |
1 |
تفاصيل التغليف: |
Standard Export Package |
موعد التسليم: |
Within 20 days |
القدرة على التوريد: |
15 Set per Month |
نوع الدفع: |
T/T |
مجموعة المنتج : |
H-beam assembly machine
|